User manual AEG-ELECTROLUX EHL6540FOK
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EHL6540FOK. We hope that this AEG-ELECTROLUX EHL6540FOK user guide will be useful to you.
You may also download the following manuals related to this product:
AEG-ELECTROLUX EHL6540FOK (11144 ko)
AEG-ELECTROLUX EHL6540FOK (11144 ko)
AEG-ELECTROLUX EHL6540FOK (11144 ko)
AEG-ELECTROLUX EHL6540FOK (11144 ko)
Manual abstract: user guide AEG-ELECTROLUX EHL6540FOK
Detailed instructions for use are in the User's Guide.
[. . . ] EN INDUCTION HOB USER MANUAL
2
www. electrolux. com
CONTENTS
1. 16
WE'RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. [. . . ] See below.
3. 2 Automatic Switch Off
The function deactivates the appliance automatically if: · All cooking zones are deactivated ( ). · You do not set the heat setting after you activate the appliance. · You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. ). An acoustic signal sounds some time and
ENGLISH
7
· The relation between heat setting and times of the Automatic Switch Off function: · , -- 6 hours · · · -- 5 hours -- 4 hours -- 1. 5 hours
2.
Immediately touch the necessary heat setting. To stop the function change the heat setting.
12 11 10 9 8 7 6 5 4 3 2 1 0 1 234567 8 9 10 11 12 13 14
3. 3 The heat setting
Touch the control bar at the heat setting. Do not release before you have a correct heat setting.
3. 6 Power function 3. 4 Bridge function
The Bridge function connects two cooking zones and they operate as one. To set right cooking zones touch or change the heat setting touch one of the left/right control sensors. When you use only one cooking zone of the pair we recommend that you use the rear cooking zone. Also when you use large cookware we recommend that you put it near to the rear cooking zone. The Power function makes more power available to the induction cooking zones. The Power function can be activated for a limited period of time ( see Technical information chapter). After that, the induction cooking zone automatically sets back to highest heat setting. To deactivate, change the heat setting.
3. 7 Power management
The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. The heat setting display for the reduced zone changes between two levels.
3. 5 Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. The heat setting that you set before comes on.
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates. · To set the cooking zone (if more than 1 cooking zone operate ) : touch again and again until the indicator of a necessary cooking zone comes on. touch of the timer When the indicator of the cooking zone starts to flash slow, the time counts up.
3. 10 Lock
When the cooking zones operate, you can lock the control panel, but not . When you stop the appliance, you also stop this function.
ENGLISH
9
3. 11 The child safety device
This function prevents an accidental operation of the appliance. To activate the child safety device · Activate the appliance with . To deactivate the child safety device · Activate the appliance with . To override the child safety device for only one cooking time · Activate the appliance with . [. . . ] Refer to "Power management".
The Automatic Heat Up function does not operate.
The highest heat setting is set.
The heat setting changes between two levels.
The Power management is activated.
The sensor fields become The cookware is too large Put large cookware on hot. necessary.
ENGLISH
13
Problem There is no signal when you touch the panel sensor fields. comes on comes on
Possible The signals are deactivated.
Remedy Activate the signals (refer to "OffSound control").
The Automatic Switch Off Deactivate the appliance operates. The diameter of the bottom of the cookware is too small for the cooking zone. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EHL6540FOK
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EHL6540FOK will begin.