User manual AIPTEK ACTION-HD GVS

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/television technician for additional suggestions. [. . . ] OR Connect one end of the supplied USB cable to the USB port of the camcorder and the other end to a powered PC. When the charging is interrupted or the battery pack is fully charged, the charging LED will turn green. When using a PC to charge the battery, do not power on the camcorder, or the charge will stop. Inserting a memory card (optional) To insert a memory card, do the followings: (1) Open the SD/MMC card cover. (2) Gently push the card until the card reaches the bottom of the slot. Then pull the card out of the slot. Turning on/off your camcorder Open the LCD monitor or press and hold down the Power button for 1 second to turn on the camcorder. To turn off the camcorder, press and hold down the Power button for 1 ~ 3 seconds or close the LCD monitor. If the camcorder stays inactive for a long period of time, it may automatically shut down due to the Auto-Off setting. Setting language 1. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. Use the Joystick to select the Language item, and then Press OK to confirm. When done, press OK to confirm the setting. Reading LCD indicators 00:00:05 Digital zoom Optical zoom 00:06:40 1 Mode icon Video resolution Picture resolution Continuous shot AF lock Focus Internal memory/SD card inserted Battery life Zoom ratio indicator Flash White balance Remaining recordable time NightShot Stabilizer Recording time Basic Operations Recording a video clip 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take closeup pictures, you can push the Up button to switch to Macro mode ( ). Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. The zoom function is also available during recording (except in macro mode). The camcorder has built-in electronic stabilizer, which can only be activated in HD 720P(60f) / WVGA(60f). It's normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. AF lock When recording in one spot without zooming in / zooming out or moving around, you can activate the AF lock function by moving the Joystick right. To disable this function, move the Joystick right again. AF lock switch Recording a voice clip 1. Use the Joystick switch to select the Voice Recorder mode and press OK to enter the menu screen. Press the Record button again to stop recording. 4 Taking a still picture 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take closeup pictures, you can push the Up button to switch to Macro mode ( ). Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. [. . . ] A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. This option is suitable for Germany, England, Italy, Netherlands, China, Japan, and Hong Kong. The camera automatically shuts down when staying inactive for over 1 minute. The camera automatically shuts down when staying inactive for over 3 minutes. [. . . ]