User manual AIPTEK DUO-V33F

[. . . ] If you want to take close-up pictures, you can push the Up button to switch to macro mode ( ). Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. Note: The optical zoom and digital zoom can be identified by the line in the middle of the Digital zoom zoom ratio bar. When maximum optical zoom is reached, you Optical zoom need to wait for a few seconds for the camcorder to complete 0008 auto focusing before you can use digital zoom. [. . . ] The menu items provide several options for you to fine-tune your camera functions. This setting is suitable for recording in cloudy weather or shady environments. This setting is suitable for indoor recording with fluorescent lamp lighting, or environments with high color temperature. This setting is suitable for indoor recording with incandescent lamp lighting, or environments with low color temperature. Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark. A positive value indicates the image will be brighter than usual; while a negative value makes the image dimmer. After the selftimer is turned on, the camera will have ten seconds delay before recording when the Shutter button is pressed. Enabling this setting allows you to take a photograph with a dark background. Since the shutter speed will slow down when taking photographs at a dark place, we recommend using a tripod to eliminate blurring from hand shake. This setting allows you to combine two images taken individually into one photo. When resolution is set to 10M or above, the "Photo Frame" and "Two-inOne" options, as well as the "16:9 display" function, will not be available. Follow the on-screen instructions to safely disconnect the camcorder from your computer. After connecting the camcorder to your computer, a removable disk will appear in your computer. The removable disk actually represents the storage medium of your camcorder. If the camcorder stays idle over one minute, the LCD screen will automatically shut down to save power. Can not take pictures or video clips when pressing the Shutter or Record button. It happens when you insert a memory card after taking a few pictures or video clips. I did not delete the pictures and video clips, but can not find them in the memory card. When using the camcorder: Problem Cause If the battery icon indicates low battery, the flash strobe may be disabled due to insufficient voltage. Add extra light sources or enable video light when recording video clips. The environment of shooting or recording does not have adequate light. Then I copy the file to the camcorder but cannot find it on the camcorder. [. . . ] Use the "Files of type" pull-down to filter the file types you'd like to display. Preview highlighted files to be sure that they're the ones you want. Check the "AutoPlay" box to start the playback automatically after you click a file. In addition to using the above method, you can also drag-and-drop files directly to the file list in the program window. [. . . ]