User manual AIPTEK DZO-Z33

[. . . ] Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided. Do not expose the camcorder to high temperature or leave it in direct sunlight. For your own safety, avoid using the camcorder when there is a storm or lightning. Remove the battery during long periods between usage, as a deteriorated battery may affect the functionality of the camcorder. [. . . ] This option is suitable for Germany, England, Italy, Netherlands, China, Japan, and Hong Kong. Description ) mode Press the Icon On/Off LCD Bright -2~+2 Set LCD brightness. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. The camera automatically shuts down when staying inactive for over 1 minute. The camera automatically shuts down when staying inactive for over 3 minutes. The camera automatically shuts down when staying inactive for over 5 minutes. Cancel action. Yes Format No Off 1 min Auto Off 3 min 5 min Language - Yes Default No Menu items in Setting mode (continued) Item Option Menu Disk Printer Description When connected to a PC, the camera displays a menu for you to choose a desired connection mode. When connected to a PC, the camera automatically enters Disk (removable disk) mode. Enable/Disable Start Movie function. USB Mode Start Movie On/Off * Flicker settings table: Country Setting Country Setting England 50Hz Portugal 50Hz Germany 50Hz America 60Hz France 50Hz Taiwan 60Hz Italy 50Hz China 50Hz Spain 50Hz Japan 50/60Hz Netherlands 50Hz Korea 60Hz Russia 50Hz Thailand 50Hz Note: The flicker setting is based on the frequency standard of your local power supply. Battery Life Indicator Icon Description Full battery life Moderate battery life Low battery life * If the indicator turns red, flash strobe is disabled. Empty battery life Note: To avoid sudden outage of power supply, you are recommended to replace the battery when the icon indicates low battery life. (white) 3 Battery Life Still picture Number of shots 130 * shoot every 30 seconds ** flash is off *** resolution is set to 5M (2560x1920) Video clip Recording time (minute) 110 * resolution is set to VGA (640x480 pixels) Note: This table is for your reference only. The actual battery life depends on your battery type and recharge level. Storage Capacity Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Video (min. ) VGA 7 14 28 56 QVGA 23 46 92 184 Audio (min. ) Maximum 90 190 380 760 Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Still picture 1M 520 1040 2080 4160 3M 230 460 920 1840 5M 130 260 520 1040 8M 80 160 320 640 10M 70 140 290 580 Note: The actual value of capacity may vary (up to ± 30%) depending on the color saturation and complexity of your subject and surroundings. 4 Advanced Instructions English Copying files to Your PC Installing the driver to your PC You need to install the camcorder driver to ensure that video clips can be played back on your PC. Then place the accessory CD into the CD-ROM drive. Do not connect the camcorder to your computer at this stage. If the autorun screen does not appear automatically, double-click on My Computer and then the CD-ROM drive. Click on the icon to launch the installation of the driver. Notice for Windows 2000 users: During the installation process, a warning message regarding digital signature may appear twice or more. The software is fully compatible with Windows 2000 operation system. 3. Install the driver. The Install Shield Wizard will then appear and automatically install the program. Click on Next and follow the on-screen instructions to complete the installation. 1 Copying files to Your PC (continued) 4. After the driver installation is completed, the program will prompt you to install Windows Media Player Codecs. If you are not sure whether the codecs have been installed in your computer, please click on Yes and follow the on-screen instructions to complete the installation. After the codecs installation is completed, you will be prompted to install Direct X 9. 0c or above if the program is not yet installed in your computer. Please click on Yes to continue. Windows Media Player Codecs and Direct X 9. 0c or above are necessary for viewing the video clips recorded by the camcorder. 6. After the installation is completed, you may need to restart your computer for the driver to take effect. 2 Connecting the camcorder to your PC 1. [. . . ] (Please refer to "Converted files" section for more information. ) System requirements To install and run the MediaConverter, your system must meet the following minimum requirements: Microsoft Windows 2000/XP (Home or Professional) 50 MB free hard drive space 256 MB RAM DirectX 9 (DirectX 9c recommended) Microsoft Windows Media Player 9. 0 (for converting WMA and WMV files) Microsoft Windows 2000/XP (Home or Professional) Apple QuickTime 6. 5 (for converting MOV files) 9 Appendix: B Supported file formats Video Video files are converted and copied to the selected location as MPEG-4 encoded AVI files, WMV files or MPEG-4 encoded ASF files (Default). Supported file types for conversion - AVI (Microsoft Video 1 format, Cinepak, Intel Indeo, uncompressed, etc. ) - MPEG-1 in MPEG, MPG, MPE - DAT (VCD MPEG1) - MPEG-4 in AVI format - MPEG-4 in ASF - WMV - QuickTime MOV QuickTime 6. 5 and Windows Media Player 9. 0 or above are required for QuickTime MOV and WMV file conversion, respectively. Supported file types for export - AVI (MPEG-4 SP) - WMV - ASF(MPEG-4 SP) 10 Appendix: B Converted files 11 Appendix: B Step 1: Select media Adding files for conversion 1 Click the "Select Media" button. Navigate to the folder that contains the files you'd like to convert. [. . . ]