User manual AIPTEK GO-HD

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/television technician for additional suggestions. [. . . ] To turn off the camcorder, press and hold down the Power button for 1 ~ 3 seconds or close the LCD monitor. If the camcorder is not turned on after pressing the Power button, please check: 1. If the camcorder stays inactive for a long period of time, it may automatically shut down due to the Auto-Off setting. Setting language 1. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. Use the Joystick to select the Language item, and then Press OK to confirm. Use the Joystick switch to the Setting mode and press OK to enter the menu screen. Use the Joystick to select the Date & Time item, and then Press OK to confirm. When done, press OK to confirm the setting. Reading LCD indicators 00:00:05 00:06:40 1 Mode icon Video resolution Picture resolution LED lights mode Macro mode Battery life Zoom ratio indicator SD card inserted Remaining recordable time While Balance mode Exposure mode Flash mode Histogram mode Selftimer mode NightShot mode Recording time The LCD will display 16:9 ratio while setting as HD (720P) video resolution. The LCD will display 4:3 ratio while setting as D1 (480P) or CIF video resolution. (Please refer to the page 7 for more detailed instructions. ) 5 Basic Operations Recording a video clip 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). 30cm ~ (12" ~ ) Zoom in 5cm ~ 30cm (2" ~ 12") * At 1. 5X fixed zoom 2. Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. Press the Record button again to stop recording. Zoom out The zoom function is also available during recording (except in macro mode). If the surroundings are dark, you can switch the LED lights mode to On or Auto to help focus and lighting. It's normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. 6 Taking a still picture 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). 30cm ~ (12" ~ ) Zoom in 5cm ~ 30cm (2" ~ 12") * At 1. 5X fixed zoom 2. Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. The optical magnification is Adjust other advanced settings if necessary. If the surroundings are dark, you can switch the LED lights mode to On or Auto to help focus and lighting. Zoom out 3X. 3. [. . . ] While the formatting function will erase all locked/unlocked files. Slide Show Yes/No Lock * If there are no files in the camera, no items will be seen. 1 Menu items in Setting mode Power-on Press the MODE button Enter the Setting ( the MENU button. Item Date & Time Beep Flicker Option On/Off 50Hz 60Hz HDTV NTSC Set date and time. This option is suitable for Germany, England, Italy, Netherlands, China, Japan, and Hong Kong. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. The camera automatically shuts down when staying inactive for over 1 minute. [. . . ]