User manual AIPTEK HYPERPEN 12000U

[. . . ] If the time arises to throw away your product, please recycle all the components possible. Batteries and rechargeable batteries are not to be disposed in your domestic waste!Knowing your camcorder parts Zoom out/ Volume down SD/MMC card slot If your camera only indicates " AV OUT", it does not support "AV IN" function. Note that the metallic contacts must be aligned with the contacts in the compartment. [. . . ] When using a PC to charge the battery, do not power on the camcorder, or the charge will stop. To insert a memory card, do the followings: (1) Slide open the SD card cover. (2) Gently push the card as indicated until the card reaches the bottom of the slot. Turning on/off your camcorder Open the LCD monitor or press and hold down the Power button for 1 second to turn on the camcorder. To turn off the camcorder, press and hold down the Power button for 1 ~ 3 seconds or close the LCD monitor. If the camcorder stays inactive for a long period of time, it may automatically shut down due to the Auto-Off setting. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. Use the Joystick to select the Language item, and then Press OK to confirm. Mode icon Video resolution Picture resolution Macro mode Battery life Zoom ratio indicator SD card inserted Remaining recordable time Note: Please make sure your memory card is inserted before recording. Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. It's normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. Plug one end of the component video cable into the (Component Video IN) port on the HDTV and the other end into the (HD OUT) port on Camcorder. Plug one end of the other AV cable into the (Component Audio IN) port on the HDTV and the other end into the (AV OUT) port on Camcorder. If you record an HD resolution clip while connected to your HD TV, the TV display video resolution will down size to D1 (480P) resolution due to data bit rate, but the recorded file will remain HD with no change. Connect the other end of the AV cable to the "AV out" port on your camcorder. The menu items provide several options for you to fine-tune your camera functions. Enabling this setting allows you to take a photograph with a dark background. Since the shutter speed will slow down when taking photographs at a dark place, we recommend using a tripod to eliminate blurring from hand shake. This setting is suitable for recording in cloudy weather or shady environments. This setting is suitable for indoor recording with fluorescent lamp lighting, or environments with high color temperature. This setting is suitable for indoor recording with incandescent lamp lighting, or environments with low color temperature. Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark. [. . . ] A positive value indicates the image will be brighter than usual; while a negative value makes the image dimmer. After the selftimer is turned on, the camera will have ten seconds delay before recording when the Shutter button is pressed. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. Icon Full battery life Moderate battery life Low battery life * The flash strobe and the LED lights will be disabled. [. . . ]