User manual AIPTEK HYPERPEN 6000U

[. . . ] Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. Knowing your camcorder parts Zoom out/ Volume down SD/MMC card slot Note that the metallic contacts must be aligned with the contacts in the compartment. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other end to a wall outlet. When the charging is interrupted or the battery pack is fully charged, the charging LED will turn green. [. . . ] The zoom function is also available during recording It's normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. Taking a still picture Note: Please make sure your memory card is inserted before recording. Due to the sensor capture feature, the LCD preview and ratio of still picture capture will vary depending upon different video resolution settings. The image capture of the camera is set where as video resolutions are different. Use the Joystick switch to select the Voice Recorder mode and press OK to enter the menu screen. The digital video recording technology allows you to record TV program via AV-IN cable. Connect the other end of the AV cable to the "AV In" port on your camcorder. Make sure that the images displayed on the TV or DVD player is also displayed on the camera's LCD. Playing back your recordings There are three folders below My works: Video, Picture, and Voice. Select Video, Picture or Voice, and then press the OK key to enter the index mode. File type Index mode Shift between Index mode and Fullscreen mode Full-screen mode Shift between files 1. Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark. A positive value indicates the image will be brighter than usual; while a negative value makes the image dimmer. After the selftimer is turned on, the camera will have ten seconds delay before recording when the Shutter button is pressed. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. Icon Full battery life Moderate battery life Low battery life * The flash strobe and the LED lights will be disabled. " Empty battery life Note: To avoid sudden outage of power supply, you are recommended to replace the battery when the icon indicates low battery life. Still picture Number of shots 200 * shoot every 30 seconds ** flash is off *** resolution is set to 5M (2592x1944) Video clip Recording time (minute) 90 * resolution is set to HD (1280x720 pixels) The actual battery life depends on your battery type and recharge level. Memory SD card (256MB) SD card (512MB) SD card (1GB) SD card (2GB) SD card (4GB) Video (min. Note: The actual value of capacity may vary (up to ± 30%) depending on the color saturation and complexity of your subject and surroundings. Lens File format Video frame rate External memory LCD display Digital zoom TV out Interface Microphone Speaker Nightshot Battery Note: Specifications are subject to change without notification. System requirements are different in different video resolution settings: 0GHz or above System RAM = 512MB (1GB recommended) Display card = nvidia Geforece 7600 or ATI X1600 or above with 256MB of RAM D1 (720x480) @30fps CIF (352x240) @30fps OS = Windows 2000/XP, Vista or above (QuickTime 7. [. . . ] note: You can remove multiple sections of a video by repeating steps 1-4. press the "Clear All" button to remove all trimmed areas and restore the video to its full length. The "Go to" buttons can be used to jump to the previous or the next edit on the timer. - Set as Menu Button Using the Play/Pause controls, click "Pause" when you come to the scene that you want to use for your chapter button, and then click on the arrow icon next to the preview area. [. . . ]