User manual AIPTEK HYPERPEN 8000U

[. . . ] Using memory cards Additionally to the already existing Internal memory you can use different Memory cards as well as USB sticks. the photo frame is compatible with USB Flash drive , CF , SD , MMC and MS Pro. Just put the memory card into the card port at the buttom of the device. Before powering on, make sure the power adapter is correctly plugged in and the photo frame switched on. [. . . ] Before powering on, make sure the power adapter is correctly plugged in and the photo frame switched on. After powering on, the Start interface shown on screen is according to the "StartUp Set" setting. User can choose calendar, picture, music, movie, file list in the start up interface. When the "Picture" setting is selected, the photo frame will automatically start picture slide show from the memory card /USB stick or NAND. When the "StartUp Set" setting is "Music", the photo frame can automatically play the audio file from the memory card /USB stick or NAND after powering on When the "StartUp Set" setting is "Video", the photo frame can automatically play the video file from the selected memory card /USB stick or NAND after powering on When the "StartUp Set" setting is "PlayList ", the photo frame will automatically enter the filemanager screen after powering on When the "StartUp Set" setting is "calendar", the start up screen will show the calendar (Fig. On the following pages the different functions and menus of the photo frame will be presented. When you choose a memory card or USB or NAND memory and press "ENTER", the function selection screen will display. File manager (5) Setup Use the Circle button (left & right) to shift between items, and then press ENTER to confirm the selection. Select the Item "Setup" and confirm your choice with the ENTER button. The following window will appear now and you can see the options mentioned below. System search music files in the current memory equipment and play them automatically. During music playing, uses the control bar to perform control operation, the functions are shown as figure 6. Press Circle button(right)to move the option to "play mode" , there are three modes in this option, "standard", " repeat one" and "dir. Circle button (Left & Right) to adjust the volume, press "ENTER" button to save parameters, press "ESC" button to close the menu(not save parameters). To get to this menu choose the icon movie and confirm with the ENTER button. The system will search the video files in the current memory equipment and play them automatically. During movie playing, press Circle button(Up) to open the volume menuOperation as same as 1-1. While the control bar is active, you can use the Circle button (left & right) to shift between function items. When the "Function switch" item is highlighted, you can use the Circle button (left & right) to switch between "subtitle on/off", "video format information" and "play mode". When "play mode" is being selected, you can press ENTER to switch between "standard play", "repeat one" and "dir repeat" options. [. . . ] When the "Function switch" item is highlighted, you can use the Circle button (left & right) to switch between "subtitle on/off", "video format information" and "play mode". When "play mode" is being selected, you can press ENTER to switch between "standard play", "repeat one" and "dir repeat" options. After use Circle button (Right) to choose memory equipment, press "ENTER" button or Circle button (Right to view the contentfigure 6. If a folder has both picture and music, when display picture, the music will play. [. . . ]