User manual AIPTEK MINI PENCAM 1.3

[. . . ] Press "Finish" to complete installation. English Hardware Installation Connect the smaller end of the USB cable to the USB port of your camera. Plug the larger end of the USB cable to the USB port of your PC. USB English Chapter 2: How to Use Your Digital Camera Introduction The built-in memory of your camera is 128Mbits Flash memory plus 128Mbits SDRAM memory. It supports two kinds of resolution - high resolution (1248x960) pictures and low resolution (640x480) pictures. It also supports AVI Movie mode( 624x480) and (304x240) for high resolution and low resolution. [. . . ] To change "H" or "L" resolution, press the shutter. Note for Still Image Mode & AVI Movie mode High Resolution: (1248x960), up to 40 pictures Low Resolution: (640x480), up to160 pictures Still image mode Note: Still pictures are stored in Flash Memory. Pictures will not be erase even you upload or install new batteries or unplug USB cable. High Resolution : ( 624x480 ), up to 30sec/10fps Low Resolution: ( 304x240 ), up to 120sec/10fps. AVI Movie mode Note: AVI Movie is stored in SDRAM. When unloading batteries or unplugging USB cable, all AVI Movie will be erased. Thus, please download AVI Movie to PC before unloading batteries or unplugging USB cable. English Tips for taking a good picture Always place the subject in the centre of the view finder, and have the light source behind you (the camera). Select the proper focal length in accordance with the distance between the camera and subject. When not used for a period of time, remove the batteries from the camera. Due to the high sensitivity of the electronic sensor, any slight moving when taking pictures might end up with vague pictures. DO NOT un-plug the USB cable when the camera is connecting to your PC for either downloading pictures or acting as a PC camera. It might cause camera error. English Chapter 4: How to Transfer Photo and Video to PC Click the " Mega Camera Manager " icon on the Desktop to execute the program where you can begin to use your camera. Mode Selecting = Press the "Live View" button to change the camera to PC Camera mode. = Press the "DSC Function" button to change the camera to DSC mode. DSC Function (DSC Mode) Live View (PC Camera Mode) English PC Camera Mode It is easy to attach your camera to your system. The current view is displayed in the "preview" window. Live View Mode Record Snapshot Video Format Stting Video Source Live preview = Press "Video Source" to select Video Source. = Press "Snapshot" button to capture an image to the work area. = Press "Record button" to record a video clip to the work area. Video Record If you wish to change the recording speed, adjust the Frame rate from 1 to 30. [. . . ] Then press the shutter button and your camera will reset. English Addendum for MS windows 98 SE User: Since the default setting of Win 98 hard disk controller has closed the DMA channel, there is a chance that the system might be hung when you are executing the "Recording" function under the "Live" mode of our Mega Camera Manager. Select "My Computer ", click the right button of your mouse and select the "Properties". Select the " Device Manager " tap, click on the "Disk drivers" and double-click the " Generic Disk Type" as the right-side picture: 3. [. . . ]