User manual AIPTEK POCKET DV 6800 LE

[. . . ] Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Only JPEG pictures and the first frames of MPEG files will be displayed. Before using the Print command in the menu, you need to connect the camera to a PictBridge compatible printer via the accessory USB cable. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. When connected to a PC, the camera displays a menu for you to choose a desired connection mode. You need to install the camera driver to ensure that video clips can be played back on your PC. If the autorun screen does not appear automatically, double-click on My Computer and then the CD-ROM drive. Notice for Windows 000 users: During the installation process, a warning message regarding digital signature may appear twice or more. Click on Next and follow the on-screen instructions to complete the installation. After the driver installation is completed, the program will prompt you to install Windows Media Player Codecs. If you are not sure whether the codecs have been installed in your computer, please click on Yes and follow the on-screen instructions to complete the installation. After the codecs installation is completed, you will be prompted to install Direct X . After the installation is completed, you may need to restart your computer for the driver to take effect. Turn on your computer, and then connect the accessory USB cable to the USB port of your computer. Notice for Windows 000/XP/ME users: If you want to disconnect the camera from your computer, please follow these steps: 1. Follow the on-screen instructions to safely disconnect the camera from your computer. 1This step varies depending on your After the camera is connected to your computer, a dialogue window will appear automatically. Please select the item Open folder to view files using Windows Explorer and click OK. 4Drag the target file into My Documents or the After connecting the camera to your computer, a removable disk will appear in your computer. The removable disk actually represents the storage medium of your camera. The PC camera software is included in the camera driver, and therefore you should install the driver before using the PC camera function. Turn on the camera, and then connect the camera to your computer using the accessory USB cable. Use the Direction buttons to select the Camera item and press the OK key to confirm. [. . . ] In addition to using the above method, you can also drag-and-drop files directly to the file list in the program window. However, you'll most likely want to save the files to your portable device. In this case, make sure your device is connected, and then click "Select Destination" and choose the device. Each section lets you select one of two settings: "Optimize for the selected device, " and "Use custom conversion settings. [. . . ]