User manual AIPTEK POCKET DV Z200 PRO

[. . . ] If the camcorder stays inactive for a long period of time, it may automatically shut down due to the Auto-Off setting. Language: Power-on Press the Mode button Enter the Setting mode Use the Direction buttons to select the Language item and press the OK button to enter Use the Direction buttons to select a suitable language and press the OK button to confirm. Time: Power-on Press the Mode button Enter the Setting mode Use the Direction buttons to select the Date&Time item and press the OK button to enter Use the Direction buttons to set the correct date and time, and then press the OK button to confirm. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. [. . . ] This setting allows you to combine two images taken individually into one photo. When resolution is set to 10M or above, the "Photo Frame" and "Two-inOne" options, as well as the "16:9 display" function, will not be available. Only JPEG pictures and the first frames of MPEG files will be displayed. Before using the Print command in the menu, you need to connect the camera to a PictBridge compatible printer via the accessory USB cable. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. Item Option Menu Disk Printer Description When connected to a PC, the camera displays a menu for you to choose a desired connection mode. Note: The flicker setting is based on the frequency standard of your local power supply. Icon Description Full battery life Moderate battery life Low battery life * If the indicator turns red, flash strobe is disabled. Empty battery life Note: To avoid sudden outage of power supply, you are recommended to replace the battery when the icon indicates low battery life. Still picture Number of shots 130 * shoot every 30 seconds ** flash is off *** resolution is set to 5M (2560x1920) Video clip Recording time (minute) 110 * resolution is set to VGA (640x480 pixels) The actual battery life depends on your battery type and recharge level. Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Video (min. Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Note: The actual value of capacity may vary (up to ± 30%) depending on the color saturation and complexity of your subject and surroundings. You need to install the camcorder driver to ensure that video clips can be played back on your PC. If the autorun screen does not appear automatically, double-click on My Computer and then the CD-ROM drive. Notice for Windows 2000 users: During the installation process, a warning message regarding digital signature may appear twice or more. Click on Next and follow the on-screen instructions to complete the installation. After the driver installation is completed, the program will prompt you to install Windows Media Player Codecs. If you are not sure whether the codecs have been installed in your computer, please click on Yes and follow the on-screen instructions to complete the installation. After the codecs installation is completed, you will be prompted to install Direct X 9. After the installation is completed, you may need to restart your computer for the driver to take effect. [. . . ] Playing the converted ASF files in your camcorder To play the video clips or movies (MPEG-4 in ASF format only) converted by ArcSoft MediaConverter in your MPEG-4 digital camcorder, please follow the steps below. Step 1 Insert a SD/MMC card in the card slot of the camcorder and connect the camcorder to PC via the USB cable. You could follow the instructions of "Connecting the camcorder to your PC" for more information. Step 2 Save the ASF files converted by MediaConverter on PC to your camcorder. [. . . ]