User manual ALECTO FR-70

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALECTO FR-70. We hope that this ALECTO FR-70 user guide will be useful to you.


ALECTO FR-70 : Download the complete user guide (3725 Ko)

Manual abstract: user guide ALECTO FR-70

Detailed instructions for use are in the User's Guide.

[. . . ] The recharge station that comes with the FR-70 is only suitable for recharging the supplied battery packs. First, remove the belt clip by pressing the lock Tab back and pushing the belt clip upwards and out of the radiophone. Now open the battery compartment by releasing the tab at the bottom and lifting the battery cover. Install the batteries as indicated and pay attention to the polarities (+ and -). [. . . ] VOX FUNCTION: When you activate the VOX function (VOX = Voice Activated Transmission), the FR-70 will start transmitting as soon as you talk into the microphone. Use the and button to set the switchon sensitivity (`OF' is off, `1' is the lowest sensitivity, `3' is the most sensitive) We recommend using this function in combination with headsets. CHANNEL MONITORING: (monitoring) This function turns off the noise reduction, allowing you to listen to weaker broadcasters on the selected channel. Press and hold the button for 2 seconds to turn off noise reduction and listen to the channel Between listening to the current channel Buttons for 1 second to start scanning - press the button to continue scanning when you're only receiving noise on a channel - press the button on a stopped channel to scan all sub-channels - press the PTT button to finish scanning SPECIFIC CHANNEL SCAN: This allows you to alternately listen to the currently set channel and a 2nd channel: Use the or button to select the second channel (select `OF' to stop scanning) Press and hold the button for 2 seconds, Press the button to start the timer. press The button again to pause and press the button to reset the timer. ROGER BEEP: When this function is enabled, the receiving post will hear a double beep tone as soon as you stop transmitting. Press the button to turn on the function (`ON' in the display) or press the button to turn the function off (`OF' in the display) 3. KEY TONES: Key tones are the tones that sound as soon as You can turn these tones on Press the button to turn on the function (`ON' in the display) or press the button To turn the function off (`OF' in the display) Press the or button to select your Use the or button to set your desired Sub-channel (1-38) or to turn this function off Press the PTT button to confirm Keep in mind that the handset of the person talking with you must be set to the same subchannel. CTCSS CODE CTCSS (Continuous Tone Controlled Squelch System) is a tone code sent when transmitting and cannot be heard. The receiver will only reproduce the signal if the tone code of the transmitting radiophone matches the tone code of the receiving radiophone. To prevent being disturbed by the signals of other PMR-446 radiophones communicating on the same channel. You can choose from 5 tones and `tone off': Use the or button to change the call Tone, the speaker will play the selected tone If choosing the `OF' option, you can still send a call tone (tone 1), but it will not sound through the speaker of your own walkie-talkie. Use the and buttons to adjust the alarm, the FR-70 will vibrate to confirm (`OF' = vibration alarm off') KEYPAD LOCK: By activating the keypad lock, the , and Press and hold the button for 2 seconds until ` ' appears in the display 2. Press and hold the button again for 2 seconds to unlock the keypad GENERAL: The FR-70 is a transmitter/receiver working with radio waves on the 446 MHz band. Its signal transmission can be affected by external influences such as other radiophones, transmitters, wireless phones, etc. When your radiophone is being interfered with or causes interference, simply changing the channel usually solves this problem. The use of this radiophone is permitted in all the countries of the EU. If you want to bring the FR-70 to countries outside the EU, you should consult the local restrictions on the use of PMR446 equipment. Don't forget that the signal of the FR-70 can also be heard by radiophones or receivers other than yours. It is in no way allowed to make any changes to the electronics or the antenna of the FR-70. [. . . ] WHAT TO DO: If you note any anomalies, first read the user's manual. If you cannot find any solution to your problem, contact your retail or www. It does not cover the use of parts or accessories not delivered with this device, neglect or any failure caused by humidity, fire, flood, lightning or any natural disaster. The warranty does not cover alteration or modifications of the product by unauthorized qualified service personal. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ALECTO FR-70




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALECTO FR-70 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.