User manual AOC 917VW

[. . . ] Preface About This Guide This guide describes the monitor's features, setup, and operation. The sections are as follows: · · · · · · Safety Instructions: lists safety information. Product Information: lists the technical specifications of the monitor. National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. [. . . ] Set the resolution SLIDE-BAR to 1440 by 900. External Controls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences. The power indicator will light up. 1 2 3 4 5 Eco Mode / Up Exit / Left Menu / Right Auto / Down Power on/off OSD Settings · 1) Press the MENU-button ( ) to activate the OSD window. Once the desired function is highlighted, press the MENU-button to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it. 4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. 5) Eco Mode hot key ( ) : Press the Eco key continuously to select the Eco mode of brightness when there is no OSD ( Eco mode hot key may not be available in all models). 6) Volume adjustment hot key : When there is no OSD , press Volume ( ) to active volume adjustment bar, press or to adjust volume ( Only for the models with speakers). DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: "Color Boost" and "Picture Boost" . DCC: Dynamic color control ICM: Intelligent color management 1) How to use Color Boost? YCM adjustment: In addition to the basic R (red), G (green), B (blue) color adjustments, Color Boost has added Y (yellow), C (cyanine), and M (magenta) for more color fine-tuning options. YCM adjustments are in the third icon labeled "Color Temperature "in the OSD menu. When adjusting YCM values, RGB values will also be changed automatically due to the color correlation between RGB and YCM. Five color-enhancement settings: To accommodate various display needs, Color Boost also offers 5 different color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled "Color Boost" in the OSD menu and select one of the five settings you desire to be turned on. Full Enhance: more vibrant. When "Full Enhance" is turned on, the color saturation of the entire screen is fully enriched, thus all colors become Nature Skin: When "Natural Skin" is turned on, the red and yellow colors are enriched automatically, thus presents human skin with more natural and truer colors. "Natural Skin" setting is ideal for viewing human portrait and detailed skin texture. Green Field: When "Green Field" is turned on, the green color is enriched so that football field and mountain landscape would look more natural and fresh. "Green Field" setting is ideal for watching mountain scenery and outdoor sports. Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth. Standard Mode Text Mode Internet Mode Game Mode Movie Mode Sports Mode Adjust to Gamma1 Adjust to Gamma 2 Adjust to Gamma 3 Disable dynamic contrast ratio Gamma DCR On Enable dynamic contrast ratio mage Setup Clock Focus H. Position V. Position Color Temp. Warm Normal Cool sRGB User 0-100 0-100 0-100 0-100 Adjust picture Clock to reduce Vertical-Line noise. Adjust Picture Phase to reduce Horizontal-Line noise Adjust the verticalposition of the picture. Red Gain from Digital-register Yellow Gain from Digital-register Cyan Gain from Digital-register Magenta Gain from Digital-register Disable or Enable Full Enhance Mode Disable or Enable Nature Skin Mode Disable or Enable Green Field Mode Disable or Enable Sky-blue Mode Disable or Enable AutoDetect Mode Disable or Enable Demo Adjust Frame Size Adjust Frame Brightness Adjust Frame Contrast Adjust Frame Hue Adjust Frame Saturation Adjust Frame horizontal Position User-B User-G User-R User-Y User-C User-M on or off on or off on or off on or off on or off on or off 0-100 0-100 0-100 0-100 0-100 H. position Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Picture Boost Frame Size Brightness Contrast Hue Saturation Position Bright Frame OSD Setup H. Position V. Position Timeout Language Extra Input Select Auto Config Reset DDC-CI Information V. position on or off 0-100 0-100 0-100 Adjust Frame vertical Position Disable or Enable Bright Frame Adjust the verticalposition of OSD Adjust the horizontal position of OSD Adjust the OSD Timeout Select the OSD language Select Digital Sigal Source as Input Select Analog Sigal Source as Input Auto adjust the picture to default Reset the menu to default Turn ON/OFF DDC-CI Support Show the information of the main image and sub-image source Digital Analog yes or no yes or no LED Indicators Status Full Power Mode Active-off Mode LED Color Green or Blue Orange or red 5. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. [. . . ] Click the Start button; select and click on 'Control Panel'. Choose 'Device Manager' and Click on 'Update device drivers'. Select 'Monitor' and then right click on 'Generic PnP Monitor'. Click the 'Browse'button and choose the drive in which you've placed the disk. [. . . ]