User manual APPLE 12 MINI

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual APPLE 12 MINI. We hope that this APPLE 12 MINI user guide will be useful to you.


APPLE 12 MINI : Download the complete user guide (14813 Ko)

Manual abstract: user guide APPLE 12 MINI

Detailed instructions for use are in the User's Guide.

[. . . ] This manual includes technical instructions for replacing genuine Apple parts in iPhone and is intended for individual technicians with the knowledge, experience, and tools required to repair electronic devices. If you're not comfortable performing the repairs as instructed in this manual, don't proceed. Failure to follow the repair instructions or to use genuine Apple parts or proper tools may cause fire or other safety issues and lead to personal injury or death. Use other than as described in the user guide, repair, or disassembly may cause damage, which could result in hazardous exposure to infrared laser emissions that are not visible. [. . . ] To avoid damaging the enclosure or display, ensure that the internal display clips are released before you tilt up the display. If the battery is dented, punctured, or otherwise damaged, stop the repair. Use a torque driver and the Micro stix bit to remove the trilobe screw from the lower cowling. Use a torque driver and the Micro stix bit to remove four trilobe screws (1­4) from the upper cowling. Hold the upper cowling in place and remove the last trilobe screw (5). Use the black stick to lift the end of the battery flex cable off the connector. caution You must disconnect the battery flex cable first to ensure that the iPhone remains turned off. Use the black stick to lift the ends of the display flex cable (1) and the receiver flex cable (2) off the connectors. Repeat this process until all the adhesive is removed from the perimeter of the enclosure. caution Don't touch the TrueDepth camera assembly, grounding springs, or nearby parts. Use ethanol wipes or IPA wipes to clean any adhesive residue from the enclosure. Ethanol or isopropyl alcohol may damage the display and affect image quality. Ensure that the internal display clips are at a 90-degree angle and aren't bent or damaged. If the internal display clips are damaged, you may need to replace the display. If you're installing a replacement display, peel the protective liner from the top and underside Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and cause safety issues. Place the enclosure in the repair tray with the Lightning connector facing the cutout. Ensure that the top edge of the TrueDepth camera is under the lip of the enclosure. If the TrueDepth camera is positioned incorrectly, use the black stick to move it away from the grounding clip. Then insert the top edge of the TrueDepth camera under the lip of the enclosure. Align the replacement display adhesive over the enclosure with the top holes over the TrueDepth camera assembly and the bottom tab on the left. Ensure that you've removed all adhesive residue from the display and the enclosure before you apply the replacement display adhesive. The replacement display adhesive has a top release liner, a middle release liner, and a bottom release liner. [. . . ] The camera cowling has tabs that fit into slots under the lip on the right side of the enclosure. Inspect the tabs and grounding spring on the cowling for damage before reassembly. Hold the cowling with ESD-safe tweezers and slide the cowling tabs into the slots. Avoid touching the grounding spring as you reinstall the camera cowling. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE APPLE 12 MINI




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual APPLE 12 MINI will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.