User manual ART PB4X4 PRO

[. . . ] 4x4 POWER DISTRIBUTION UNIT Operation Manual PB 4X4 (FRONT) SP 4X4 (FRONT) PS 4x4 (FRONT) BACK (ALL UNITS) INTRODUCTION We congratulate you on choosing an ART 4x4 Power Distribution Unit. The latest advances in power technology have been utilized in the design of these units. All 4X4 Models (Power Base, Smart Power and Power Station) Feature: · Front-Mounted Circuit Breaker Reset Switch · Surge & Spike Protection · EMI & RFI Filtering · Unique "4X" Distribution on the Back- Four of the Eight Rear Switched Outputs are wider for Wall Wart Devices · Total Power Capacity of 1800 watts · Rugged All-Steel Chassis Occupies 1u Rack Space Smart Power (SP) adds: · 2 Front Shock-Mounted Light Posts · Backlit Linear Meter to Monitor Input Voltage · Separate On/Off Light Switch · Adjustable Dimmer Dial Power Station (PS) has all SP features, and adds: · Backlit Ammeter to Monitor Load Current The 4x4 POWER DISTRIBUTION UNITs protect your delicate electronic equipment with a high voltage varistor (MOV) surge and transient suppressor. [. . . ] If you find that the heat from the tubes is excessive, reduce the setting of the Dimmer control, or substitute a 4-Watt bulb. BULB REPLACEMENT (SP & PS) Bulbs are easily replaced without removing the unit from the rack. Simply unscrew the cap on the end of each light tube, remove the old bulb and replace. POWER SWITCHES The 4x4 POWER DISTRIBUTION UNIT has a master POWER switch for the rear outlets as well as the lights (SP & PS). All operating instructions should be read before using this equipment. To prevent the risk of electrical shock, do not remove the cover or the back. Do not expose this unit to heat sources such as radiators, stoves, or other items that generate excessive heat. This unit should be cleaned only with a damp cloth, audio solvents or cleaning detergents. When moving this equipment, it should be placed in its original carton and packing, to reduce the risk of damage in transit. WARRANTY AND SERVICE INFORMATION Limited Warranty Applied Research and Technology will provide warranty service for this unit in accordance with the following warranty statement: Applied Research and Technology (A R T) warrants to the original purchaser that this product is free from defects in workmanship and materials for a period of one year from the date of purchase. A R T will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or an authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. EXCLUSIONS: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced or removed. A R T reserves the right to make changes in design and make additions or improvements upon this product without any obligation to install the same on products previously manufactured. A R T should not be liable for any consequential damages, including without limitation, damages resulting from the loss of use. Some states do not allow limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may also have other rights, which vary, from state to state. [. . . ] Box), a copy of your purchase receipt, a daytime phone number and the description of the problem. 6) Ship the unit to: Applied Research and Technology a Division of Yorkville Sound Inc. 4625 Witmer Industrial Estates Nigara Falls, NY 14305 Attn: Repair Department R. A. # _______________ [. . . ]