User manual ARTHUR MARTIN ASF65090S

[. . . ] Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 2 3 4 5 5 7 7 8 10 11 Setting and starting a washing programme 12 Washing programmes 13 Care and cleaning 14 What to do if. . . 16 Technical data 17 Installation 17 Water connection 18 Electrical connection 19 Environment concerns 19 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. [. . . ] Use long washing programmes when you use detergent tablets to fully remove the detergent. 4. If you use detergent tablets, put the detergent tablet in the detergent dispenser (A). Multitab function The multitab function is for combi detergent tablets. These tablets contain agents such as detergent, rinse aid and dishwasher salt. Do a check if these tablets are applicable for the local water hardness. When you set the multitab function, it stays on until you deactivate it. The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. To activate the multitab function: · Press and hold the two multitab buttons (function buttons D and E). To deactivate the multitab function: · Press and hold the two multitab buttons (function buttons D and E). The multitab indicator light goes off. 12 electrolux Do these steps if the drying results are not satisfactory: 1. · You can only activate or deactivate the rinse aid dispenser when the multitab function is activated. ­ The indicator lights for function buttons A, B, and C start to flash. ­ The indicator light for function button B continues to flash. ­ The digital display shows the setting. Rinse aid dispenser deactivated Rinse aid dispenser activated 6. Adjust the rinse aid dosage. Setting and starting a washing programme Set the washing programme with the door ajar. You can select the washing programme and delay start also with the door closed. When you press a programme button you have only 3 seconds to select a different washing programme or a delay start. Press and hold function buttons B and C until: electrolux 13 ­ All the programme lights come on, ­ The programme in progress indicator light goes off. Fill the detergent dispenser with detergent before you set a new washing programme. Press the delay start button until the display shows on flashing the necessary delay start of the washing programme. ­ The countdown of the delay start decreases with steps of 1 hour. [. . . ] The water pressure must be in the limits (refer to the chapter 'Technical data'). Make sure that the local water authority gives you the average mains pressure in your area. Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Turn the inlet hose to the left or the right to suit the installation. [. . . ]