User manual ARTHUR MARTIN ASF66850W

[. . . ] Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Setting the water softener Use of dishwasher salt Use of rinse aid Daily use Loading cutlery and dishes Use of detergent Multitab function Select and start a washing programme 2 3 4 5 6 7 8 8 9 13 14 15 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 16 17 18 19 20 20 21 22 23 24 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. [. . . ] With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. electrolux 15 When using the multitab function, the cycle duration may change. Activate/deactivate the multitab function before the start of a washing programme. Once the programme is running, the multitab function can NO longer be changed. If you want to cancel the multitab function you have to cancel the programme setting and then deactivate the multitab function. In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function To activate the Multitab function, press the Multitab button. · The activation/deactivation of the rinse aid is only possible with the Multitab function active. The programme indicator lights above function buttons A, B and C start flashing 3. Press function button B, the programme indicator lights above function buttons A and C go off. The programme indicator light above function button B continues to flash. The digital display shows the current setting. Rinse aid dispenser deactivated Rinse aid dispenser activated 4. If you decide to revert back to the use of individual detergents we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Select a washing programme (see 'Washing programmes' chart). After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start appear in the digital display. 16 electrolux 2. 3. The number in the display is no longer flashing but fixed with static light. Close the door; the countdown will continue from the point at which it was interrupted. Once the delay start has elapsed the programme will start automatically. [. . . ] If the appliance is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. DO NOT use connection hoses which have previously been used on an old appliance. This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. Water drain connection The end of the drain hose can be connected in the following ways: 1. [. . . ]