User manual ASUS P8B75-M LE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASUS P8B75-M LE. We hope that this ASUS P8B75-M LE user guide will be useful to you.


ASUS P8B75-M LE : Download the complete user guide (2918 Ko)

You may also download the following manuals related to this product:

   ASUS P8B75-M LE (3710 ko)
   ASUS P8B75-M LE (3403 ko)
   ASUS P8B75-M LE (3668 ko)

Manual abstract: user guide ASUS P8B75-M LE

Detailed instructions for use are in the User's Guide.

[. . . ] The GA-8VT800 motherboards might not function properly, if you install this card without switching the jumper to 4X(1. 5V) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X/4X mode AGP slot, but they support 2X(3. 3V) only. The GA-8VT800 motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1. 5V) specification. Therefore, AG32S (G)will work fine with VIA PT800 based motherboards. M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. [. . . ] (Default value) FOnboard H/W LAN * 8Enabled 8Disabled Enable Onboard H/W LAN function. (Default value) Disable this function. " * " FOR P8B75-M LE Only. GA-8VT800(-L) Motherboard - 40 - FOnboard LAN Boot ROM * This function decide whether to invoke the boot ROM of the onboard LAN chip. (Default Value) Enable this function. English Onboard FDC Controller Enabled Disabled Enable onboard FDC controller. (Default value) Disable onboard FDC controller. Onboard Serial Port 1 Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS will automatically setup the port 1 address. Disable onboard Serial port 1. Onboard Serial Port 2 Auto 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled BIOS will automatically setup the port 2 address. Disable onboard Serial port 2. UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. Set onboard I/O chip UART to ASKIR Mode. " * " FOR P8B75-M LE Only. - 41 - BIOS Setup English UR2Duplex Mode This feature allows you to seclect IR mode. This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR". (Default Value) IR Function Duplex Full. Onboard Parallel port 378/IRQ7 278/IRQ5 Disabled 3BC/IRQ7 Enable onboard LPT port and address is 378/IRQ7. Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP EPP ECP ECP+EPP Using Parallel port as Standard Parallel Port. For C-Stepping P4: 8X, 10X~24X default: 15X For Northwood CPU: 12X~24X default: 16X The option will display "Locked" and read only if the CPU ratio is not changeable. Auto Detect DIMM/PCI clk Enabled Disabled Detect the DIMM/PCI clock automatically. (Default value) Disable this function. GA-8VT800(-L) Motherboard - 48 - Clock Spread Spectrum Enabled Disabled Enable clock spread spectrum. (Default value) Disable this function. English CPU Clock 100MHz ~ 160MHz Set CPU Host Clock from 100MHz to 160MHz. Incorrect using it may cause your system broken. For power End-User use only! CPU Voltage Control Normal Set CPU Voltage Control to Normal. (Default value) Supports adjustable CPU Vcore from 0. 8375V to 1. 600V by 0. 025V step. For power End-User use only! Normal CPU Vcore Display your CPU Vcore Voltage. AGP OverVoltage Control Auto +0. 1V +0. 2V Supply voltage as AGP Card reguired. Set AGP OverVoltage Control to +0. 2V. Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this feature. DIMM OverVoltage Control Auto +0. 1V +0. 2V Supply voltage as DRAM module reguired. Set DIMM OverVoltage Control to +0. 2V. Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this feature. - 49 - BIOS Setup English Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2003 Award Software }Standard CMOS Features }Advanced BIOS Features }Integrated Peripherals }Power Management Setup }PnP/PCI Configurations }PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Load Fail-Safe Defaults?(Y/N)?Y Saving Exit Without higf:Select Item F10:Save & Exit Setup Load Fail-Safe Defaults Figure 9: Load Fail-Safe Defaults }Frequency/Voltage Control ESC:Quit F8: Q-Flash Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. GA-8VT800(-L) Motherboard - 50 - English Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2003 Award Software }Standard CMOS Features }Advanced BIOS Features }Integrated Peripherals }Power Management Setup }PnP/PCI Configurations }PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Load Optimized Defaults? [. . . ] 1 long 1 short: DRAM or M/B error 1 beep Refresh failure 2 beeps Parity error 1 long 2 short: Monitor or display card error 1 long 3 short: Keyboard error 3 beeps Base 64K memory failure 1 long 9 short: BIOS ROM error 4 beeps Timer not operational 5 beeps Processor error Continuous long beeps: DRAM error Continuous short beeps: Power error 6 beeps 8042 - gate A20 failure 7 beeps Processor exception interrupt error 8 beeps Display memory read/write failure 9 beeps ROM checksum error 10 beeps CMOS shutdown register read/write error 11 beeps Cache memory bad Question 11: How to set in the BIOS in order to bootup from SATA HDDs by either RAID or ATA mode?Advanced BIOS features--> SATA/RAID/SCSI boot order: "SATA" 2. Integrated Peripherals--> Onboard H/W Serial ATA: "enable" Then it depends on the SATA mode that you need to set "RAID" to RAID mode or "BASE" to normal ATA mode in the item named Serial ATA function. Question 12: For the M/B which have RAID function, how to set in the BIOS in order to bootup from IDE3, 4 by either RAID or ATA mode? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS P8B75-M LE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS P8B75-M LE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.