User manual ASUS PA238Q

[. . . ] (Class l Equipment only. ) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not bend the plug excessively and wire nor place heavy objects upon them, which could cause damage. This may cause electric shock or fire. Do not connect too many extension cords or plugs to outlet. This may cause fire. Do not disconnect the power cord while using the monitor. [. . . ] Select the "Settings" tab and click the "Advanced Properties" button. Click the "Change" button in the "Monitor Type" area. Choose "Specify the location of the driver. " Choose "Display a list of all the driver in a specific location. " then click the "Next" button. Click the "Have Disk" button Specify A:\(D:\driver) then click "OK" button. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK. " 11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box. Click Start, Settings, Control Panel, and then double-click the Display icon. In the Display Registration Information window, click the Settings tab and then click All Display Modes. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK. Click the Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors, or frequency). (Available in analog mode only) [MENU ¡æ , ¡æ ¡æ ¡æ , ¡æ MENU] Play/Stop Coarse Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). (Available in analog mode only) [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Changes the clearance of image. Sharpness [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] H-Position Changes the horizontal position of the monitor's entire display. (Available in analog mode only) [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] V-Position Changes the vertical position of the monitor's entire display. (Available in analog mode only) [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] OSD Menu Description You can choose one of 9 languages. Play/Stop Language Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. [MENU ¡æ , ¡æ ¡æ ¡æ , ¡æ MENU] H-Position You can change the horizontal position where the OSD menu appears on your monitor. [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] V-Position You can change the vertical position where the OSD menu appears on your monitor. [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Change the transparency of the background of the OSD. Transparency [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Setup Menu Description Select Auto Source for the monitor to automatically select the signal source. [MENU ¡æ , ¡æ ¡æ ¡æ , ¡æ MENU] Play/Stop Auto Source Image Reset Image parameters are replaced with the factory default values. [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Color Reset Color parameters are replaced with the factory default values. [MENU ¡æ , ¡æ ¡æ , ¡æ ¡æ , ¡æ MENU] Information Menu Information [MENU ¡æ , ¡æ MENU] Description Shows a video source, display mode on the OSD screen. Model SyncMaster G19PPlus Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? [. . . ] Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co. , Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co. , Ltd. ; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are registered trademarks of the U. S. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. [. . . ]