User manual AT&T CL81100

[. . . ] User's manual CL80100 DECT 6. 0 expansion handset for use with AT&T models CL81100/CL81200/CL81300/ CL82100/CL82200/CL82300/ CL82350/CL82400/CL82500/ CL84100/CL84200/CL84300 Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 20-22 of this manual. For complete instructions, please refer to the manual provided with your CL81100/CL81200/CL81300/ CL82100/CL82200/CL82300/CL82350/CL82400/CL82500/ CL84100/CL84200/CL84300 telephone. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] You might experience decreased performance while the microwave oven is operating. · If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector. · If the other phones in your home are having the same problem, contact your telephone service provider (charges may apply). You must subscribe to this service from your telephone service provider for this feature to work on your phone. · The caller must be calling from an area that supports caller ID. · Both you and your caller's telephone service providers must use caller ID compatible equipment. · If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter prevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about DSL filters. 16 Appendix Troubleshooting System does not receive caller ID when on a call. · Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features works only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. I subscribe to a non-traditional telephone service that uses my computer to establish connections, and my telephone doesn't work. · Make sure that the software is installed and running for your non-traditional telephone service. · Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered. · In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply. · If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information. 17 Appendix Troubleshooting The charge light is off or blinking. · Make sure you plug the power and line cords in correctly and securely. Allow up to one minute for the cordless handset and telephone base to reset. [. . . ] Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. [. . . ]