User manual AXIS 25254
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AXIS 25254. We hope that this AXIS 25254 user guide will be useful to you.
 |
Manual abstract: user guide AXIS 25254
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Instructions
This document is an addendum to the Camera Housing Operating Instructions and describes how to connect power to a Axis network camera installed in the housing. [. . . ] Connect a 230V cable to the housing connector (J3) and pull through the gland (6). Connect a 12V power cable to the connector (B) in the power supply, pull the 12V cable through the gland (7) in the housing and connect to the 12V connector (J1). Connect a 12V cable from the connector (J1) to the green connector on the camera (8). Ensure that the (+) and (-) wires are connected according to the camera model installed in the housing (see images above). To connect the heater, follow the supplied instructions and connect the cable to the connector (J2) in the housing. Proceed with the installation according to the instructions in the Installation Guide supplied with the camera. Wiring diagram
PCB Power supply
230V AC in
12V DC to camera 230V AC out PCB Housing 230V AC in
Heater 230V AC
Installation Instructions
Powering the Axis network camera and housing (no heater)
Note - this installation requires one 230V power cable and 2 x 12V cables (not supplied). Connect the mains power cable to the connector (A) in the power supply. [. . . ] Wiring diagram
PCB Power supply
230V AC in
12V DC to camera
PCB Housing
INSTALL GUIDE VT HOUSING FAN R1. 0 PART NO. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AXIS 25254
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AXIS 25254 will begin.