User manual BEKO BMGB20212B

[. . . ] We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. meanings of the symbols Following symbols are used in the various section of this user manual: c Important information and useful hints about usage. [. . . ] If the plug is no longer to accessible following installation, an all-pole disconnecting device must be present on the installation side with a contact gap of at least 3mm. The installation cabinet must not have a back panel behind the appliance. The appliance is fitted with a plug and must only be connected to a properly installed earthed socket. Only a qualified electrician who takes the appropriate regulations into account may install the socket or replace the connecting cable. If the plug is no longer accessible following installation, an all-pole isolating switch must be present on the installation side with a contact gap of at least 3 mm. The installation cabinet must not have a back panel behind the appliance. Both glass tray and turntable support must always be used during cooking. All food and containers of food must always place on the glass tray for cooking. If glass tray or turntable support crack or break, contact your nearest authorized service center. Press "Kitchen Timer/Clock" twice and the figures for hours will start flashing. Turn "Time / Weight / Auto" to adjust the hour; the input value should be between 0 and 23. Press "Kitchen Timer/Clock" and the figures for minutes will start flashing. Turn "Time / Weight / Auto" to adjust the minutes; the input value should be between 0 and 59. Press the "Microwave" key once, and "P100" will display. Press "Microwave" again or turn "Time / Weight / Auto" to select the desired power. Each time you press the key, "P100", "P80", "P50", "P30" or "P10" will be displayed respectively. Turn "Time / Weight / Auto" to set the cooking time to a value between 0:05 and 95:00. The "beep" sound can be heard after process The steps for adjusting the time in coding button are as below: 5 seconds 10 seconds 30 seconds 1 minute 5 minutes If half the grill time passes, the oven sounds twice, and this is normal. In order to have a better effect of grilling food, you should turn the food over, close the door, and then press "Start/+30Sec. Press repeatedly or turn "Time / Weight / Auto" to choose the power you want, and "G", "C-1" or "C-2" will display. Press "Weight Defrost" once, the screen will display "dEF1". If half the defrost time passes, the oven sounds twice, and this is normal. [. . . ] Leave the door of the appliance open to prevent inadvertent operation while cleaning the control panel. If mist accumulates inside or around the appliance door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity conditions. The roller ring and appliance floor should be cleaned regularly to avoid excessive noise. [. . . ]