User manual BEKO DPU8360X

[. . . ] Checking the care labels on clothes, select appropriate programme for the laundry type or use timer programmes in addition. Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well. [. . . ] C It is recommended to use a cloth bag to prevent certain delicate laundry from getting creased or damaged. Take your laundry immediately out of the dryer and hang them after the program is over in order to prevent them from getting creased. Ventilation Only ventilation is performed for 10 minutes without blowing hot air. You can air the clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme. Timer programmes to achieve the desired final drying level at low temperatures. C With this programme, the machine dries for the time selected regardless of the dryness level. * : Energy Label standard programme (EN 61121:2005) All values given in the table have been fixed according to EN 61121:2005 Standard. These values may deviate from the values in the table according to the laundry type, The machine will give an audio warning When the programme comes to an end. If you do not want the machine give an audio warning, press the Volume Level button repeatedly until "x" appears on the C You can activate this function either before or after the programme starts. More drying is performed compared to the default settings when "+" sign Appears and less drying is performed when "-" sign appears. C You can activate this function only before the programme has started. Prevent laundry from creasing if you will Not take the laundry out after the program Rotates the laundry in every 240 second For 2 hours to prevent creasing. anti-creasing is activated but the Programme is still running in the first display image below. Drying cycle is completed and the Anti-creasing step has Started in the second display image. Changing the contrast Adjust the display contrast in order to make the symbols on the display appear clearer. It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine. When the contrast is changed, all symbols on the display will appear for 3 seconds in order to indicate that the process is complete. C Perform the same procedure to revert back to the previous contrast setting. warning symbols C Warning symbols may differ according to the model of your machine. Lint filter cleaning When the programme is completed, a warning symbol will appear to remind that the filter needs to be cleaned. Water tank When the programme is completed, a warning symbol will appear to remind that the water tank needs to be drained. If the water tank becomes full while the programme is running, the warning Drain the water in the water tank and press Start / Pause / Cancel button to resume the programme. [. . . ] C A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption. C A layer can build up on the lint filter pores that can cause clogging of the Lint filter after using your machine for a while. Wash the lint filter with warm Water to remove the layer that builds Pores of the lint filter are clogged. >>> Clean the sponge and the filter cloth in the filter drawer. [. . . ]