User manual BEKO DRX837WI

[. . . ] We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein. Explanation of symbols Throughout this user manual the following symbols are used: Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. [. . . ] If you must open the loading door, do not keep it open for a long time. For models with a condenser unit: clean The condenser once in a month or after every 30 operations regularly. Read the Maintenance and cleaning of filters for detalied information. For models with flue unit: comply with the flue connection instructions and clean the flue. During the drying process, air the room well where your tumble dryer is operating. Follow the instructions in the "Programme selection and consumption table". Jeans BabyProtect Extra dry Cupboard dry plus Place the laundry to the drying machine Push and close the loading door. Select the desired program using the On/Off/ Program selection knob, the machine will turn on. Selecting a program using the On/Off/ Program selection button does not mean that the program started. You may dry your cotton laundry to be ironed in This program to have them slightly damp for ease You may dry all your cotton laundry in this (T-shirt, pants, pyjamas, baby clothes, underwear, linen, etc. You may dry your thick cotton laundry in this Put your laundry in the wardrobe without ironing. You may dry your synthetic laundry to be ironed Synthetics Iron Dry in this program to have them slightly damp for ) You can put your laundry in the wardrobe In this programme the level of noise emitted to The environment will be the lowest. Volume level will be fifty percent lower with respect to the Use this programme to dry woolen garments Such as jumpers that are washed according to the instructions. It just provides airing for 10 minutes without You can air the cotton and linen laundry that are kept closed for a long time , and You may select from time programmes Between 10 and 160 minutes to achieve the Desired drying level at low temperature. The set time independently from the dryness of This product is available to be used with For products that are Sold without a basket, you can obtain a basket From an authorized service and use the drying For details of use, see With hand wash symbol (silk blouses, thin underwear, etc. ) at low temperature in this Sports and fitness clothes may be dried with this Program used for baby clothing with can be dried approval on the label. You may dry denim pants, skirts, shirts or jackets iInt dthriiessptrhoegrsahmirt. S in a more sensitive manner, and causes less creasing and easier ironing. "Cotton cupboard dry programme" used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton. * : Energy Label standard program (EN 61121:2012) All values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from the values in the chart depending on laundry type, wringing speed, ambient conditions and voltage levels. The wool drying cycle of this machine has been approved by The Woolmark Company for the drying of machine washable wool products provided that the products are washed and dried according to the instructions on the garment label and those issued by the manufacturer of this machine. [. . . ] >>> Check the maintenance labels on the clothes and select a program suitable for the clothes' type or use time programs as extra. A program might not be set or Start / Pause /Cancel button might not be pressed. >>> Check that the program is set and it is not in Pause position. >>> Press the Start / Pause / Cancel button to start the program. [. . . ]