User manual BEKO VRR 70214 VB

[. . . ] We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with the state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Following symbols have been used throughout this guide: C Important information and beneficial advices regarding the usage of the device. A WARNING: Warnings about dangerous situations regarding safety of life and property. [. . . ] If the robot vacuum cleaner is caught up anywhere and cannot find the charging dock, please move the robot vacuum cleaner to the charging station yourself to allow it to be charged. point cleaning Bring the robot vacuum cleaner to the area to be cleaned and press " " button twice. When the mode is activated, the robot vacuum cleaner shall clean a square area of 1. When the point cleaning is completed, it does not return to the charging station and remains in its position. Bring it to the charging stand or move it to the charging stand by pressing " " button on the upper body. (Supported with the relevant mobile application only) You may select the desired cleaning power from the application: · (Supported with the relevant mobile application only) You may direct the robot vacuum cleaner to the area to be cleaned by using the manual remote control mode through the application. sleep The robot vacuum cleaner switches to sleep mode automatically if it remains stationary for 10 minutes. The robot vacuum cleaner switches to sleep mode automatically 10 minutes after it is completely recharged. resetting the system Press " " button for 15 seconds in standby position to reset the system. When the system is reset, the map and the original settings (including virtual limits) on the robot vacuum cleaner are deleted. To download the application, search for "HomeDirect-SDA" application in the mobile app store. reset Wi-Fi Press " " " " buttons simultaneously until you hear the aural warning and see the light blinking. Open the app, create a new account and follow the instructions in the application. Before setting up the Wi-Fi, ensure that the robot vacuum cleaner and the Wi-Fi network meet the The charging level of the robot vacuum cleaner shall be over 20% or the robot vacuum cleaner shall be placed on the charging dock. You may switch back to the other frequency band when the setting is completed. If you are connecting to a hidden network, please ensure that you enter the network name [SSID (sensitive to capitalization)] correctly and that you are connected to a 2. If you are using a wireless network extender, please ensure that the network name (SSID) and the password are the same with the main network. The robot vacuum cleaner is connected to the router (modem), but it cannot connect to the network. Contact your network operator to see if there is a problem in the internet data. Ensure that the network name and the password are not The robot vacuum cleaner cannot connect to the modem Ensure the Wi-Fi connection of the robot vacuum cleaner. Please refer to the "Resetting the WiFi" section of this manual Real time creation of a house map may help you understand the cleaning route and the cleaning environment easily. The map is updated in real time during each vacuuming operation to ensure a normal navigation. [. . . ] Bring the robot vacuum cleaner closer to the charging dock and try again. Make sure that the charging stand station is plugged and there is Operates with abnormal Foreign materials may have entered to the main brush, side brushes Please turn off the robot vacuum cleaner and clean it. Make sure that the Wi-Fi signal in the location Cannot connect to the Wi-Fi network. Please reset Wi-Fi, download the latest mobile application and try again. [. . . ]