User manual BLAUPUNKT BERMUDA MP35

[. . . ] Radio / CD / MP3 Bermuda MP35 Operating instructions 7 645 185 510 http://www. blaupunkt. com Open here 2 1 2 3 13 4 12 5 11 6 10 9 8 7 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 5 6 Button to switch the unit on/off and to mute the unit. AUDIO button, to adjust the bass, treble, balance and fader settings and Sound Preset Short press: MENU button, to open the basic settings menu. Keys 1 - 6 Short press: BND button, to select the FM memory bank and the AM waveband, source selection to radio mode. SRC button, to select the CD/ MP3, radio and CD changer or AUX sources. 7 8 9 : ; < = 4 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the SRC button = repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 8 to select the next or previous track. If you press the or button 8 once, the current track will be played again from the beginning. Fast searching (audible) To fast search backwards or forwards, buttons 8 keep one of the pressed until fast reversing / fast forwarding begins. Switching to CD mode If there is no CD inserted in the drive and the unit is playing Radio, CD Changer or AUX mode, gently insert CD with the printed side uppermost into the drive until you feel some resistance. "MIX CD" appears briefly in the display and the MIX symbol lights up. "MIX OFF" appears briefly in the display and the MIX symbol disappears. 13 CD MODE Scanning tracks (SCAN) You can briefly play all the tracks on a CD. The next track will then be played for scantime as set in the "Setting the scantime". For further details, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. Stopping SCAN and continuing playback To stop scanning, press the MENU button 7. The current track will then continue to be played. Pausing playback (PAUSE) Press button 3 ;. Playback is continued. Changing the display Two options are available: Track number and clock. Press the DIS button : for longer than two seconds until the required display appears. Displaying CD text Some CDs feature so-called CD text. The CD text may include the name of the performer, the album and the track name. You can have the CD text displayed as running text at every change of track. After the CD text has been displayed once, the standard display (as described in the "Changing the display" section) will be shown. Press the or button 8 repeatedly until "CD TEXT" appears on the display. Switch on ("TEXT ON") or off ("TEXT OFF") the CD text function by pressing the or button 8. Repeating tracks (REPEAT) If you want to repeat a track, press button 4 RPT ;. "RPT TRCK" appears briefly in the display and the RPT symbol lights up. Cancelling repeat If you want to stop the repeat function, press button 4 RPT ; again. "RPT OFF" appears briefly in the display and the RPT symbol disappears. Normal playback is then continued. 14 CD MODE When you have finished making your changes, press the MENU button 7 twice. MP3 MODE You can also use this car radio for playing CD-Rs and CD-RWs containing MP3 music files. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS MP3 mode Ejecting a CD Press the button 3. Remove the CD Notes: An ejected CD will be reloaded into the unit if not removed within 10 seconds to protect it from accidental damage. You may also eject a CD when the unit is off, or when CD is not playing. Preparing the MP3-CD The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the ability to play certain CDs. [. . . ] Press the button 8 repeatedly until "BAL" appears in the display. When you have finished making your changes, press the AUDIO button 6. Adjusting the bass settings Press the AUDIO button 6. When you have finished making your changes, press the AUDIO button 6. Setting the front/back volume distribution (fader) To set the front/back volume distribution (fader), press the AUDIO button 6. Press the button 8 repeatedly until "FADER" appears in the display. [. . . ]