User manual BLAUPUNKT CANBERRA RCM 85

[. . . ] Radio / Cassette Canberra RCM 85 Operating instructions 1 2 3 4 5 6 7 20 8 9 10 19 11 18 17 16 15 12 13 14 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Short instructions . . . . . . . . . . . . . . . . . . . . . . . . 27 Scrolling through the broadcasting network (only FM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Automatically storing the strongest stations with Travelstore . . . . . . . . . . . . . . . . . . . . . . . 28 Scanning stored stations with Preset Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction. REG - regional programme Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one programme and move to an area where another linked regional programme becomes stronger, the unit will switch to that programme. If you wish to continue listening to the first programme, · press the AF button for approximately 2 seconds. "REG ON" appears in the display. AF - Alternative frequency The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when "AF" appears in the display. In order to switch this function on or off, · press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. 26 Automatic tuning Scrolling through the broadcasting network (only FM) You can use the << >> buttons to tune in stations of your reception area. If several programmes of one broadcasting network can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e. g. For this it is necessary that the stations have been received at least once and that "AF" has been activated before (lights up in the display). For this purpose, you may start Travelstore seek operation: · Press FMT for 2 seconds; the system starts to run through the frequency band. With this, the requirements for selecting stations with << >> are fulfilled. Changing the memory bank (FM) You can shift between the memory banks I, II and T in order to store stations and recall them later. · Press the FMT button as many times until the desired memory bank lights up in the display. / / 27 PORTUGUÊS ESPAÑOL SVENSKA Manual tuning << >> (prerequisite: AF is switched off!) · Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch pressed down, the frequency scan is speeded up. On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T. · Select the waveband with FMT or M·L and on FM also the desired memory bank (with FMT). · Tune in a station with the rocker switch (either automatically or manually). · Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confirmed by beep). The activated preset button is indicated in the display. NEDERLANDS ITALIANO Up Down Up/down in short intervals ("AF" must be switched off) To scroll through the broadcasting network when "AF" is activated (e. g. NDR4). Storing stations FRANÇAIS ENGLISH DEUTSCH Notice: Should you tune in a station which has already been stored before, the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank. Recalling stored stations You can recall any stored station at the touch of a button. On FM, also choose the corresponding memory bank by pressing the FMT button as many times until the desired bank appears in the display. · Press the corresponding preset button briefly to recall the station. To select a station currently being scanned and switch off Preset Scan: · Press SC/MIX briefly. Scanning stations with Radio-Scan Beginning with the station currently tuned in, you can scan the waveband. The scanned frequency or the station name will start flashing in the display. [. . . ] If SCAN or MIX is active, the system will always switch to the TIME OFF mode. (1 = low) LOUD 32 RM (Radio Monitor) With RM-ON, the unit will automatically switch to the tuner whenever the cassette is fast winding. RM-OFF - The function is switched off. You can operate the Blaupunkt CD changer CDC-A05 in combination with this car radio. Selecting a disc/track using the rocker switch Switching to changer operation with SRC on the car radio Make sure that a magazine is inserted. Press SRC to switch between the different audio sources (radio - changer - tape). [. . . ]