User manual BOSCH WOT24257FF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH WOT24257FF. We hope that this BOSCH WOT24257FF user guide will be useful to you.


BOSCH WOT24257FF : Download the complete user guide (3820 Ko)

Manual abstract: user guide BOSCH WOT24257FF

Detailed instructions for use are in the User's Guide.

[. . . ] Washing machine en Instruction Manual and Installation Instructions Your new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. For more information on our products, accessories, replacement parts and services, see our website www. bosch-home. com or contact our after-sales service centres. [. . . ] If the inspection window (see horizontal arrow) on this valve turns red, the safety mechanism has been triggered. The hose must be replaced ~ after-sales service – Depending on the model, the water stop supply hose may have an unlocking device (see horizontal arrow), which must be pressed and held while the hose is being unscrewed from the tap. – On supply hoses with a transparent covering, regularly check the colour of the covering. An intensification of the colour in places indicates that there is a leak. ~ After-sales service ² 19 Faults, what to do? Removing an object from between the drum and outer tub If an object should fall between the drum and the tub, you can remove it as follows: 1. Use a screwdriver to press on the plastic end and, as you do so, push the plastic part from left to right; the part falls into the drum. 5. Turn the drum through half a turn; the object can now be removed through the opening that has been created in the drum. Position the plastic tip over the opening on the right-hand side of the drum. Close the drum flaps and turn the drum through half a turn. Check the position and fitting of the plastic part. 9. Connect the mains plug 20 Problem The machine will not start; no displays light up The appliance does not start when Start/ Pause is pressed Washing machine stops during a programme, Start/ Pause display flashes Cause/Remedial action/Suggestions – Is the plug plugged in?To unlock it, press and hold the two buttons with the key symbol at the same time for at least 3 seconds. – Is the filter in the supply hose blocked? Remains of detergent in the detergent dispenser after washing Intense noise, vibrations and "wandering" during spinning. a bathrobe), the spin speed is automatically reduced to protect the machine. If necessary, the spin cycle is stopped (see also the "Imbalance during spinning" section below). – Add some light items of laundry and repeat the spin programme. – Has a low spin speed been set? 21 Problem Programme duration longer/shorter than originally displayed/ specified. "Unwucht beim Schleudern" (Imbalance during spinning) The spin indicator in the programme sequence display flashes or the spin speed flashes in the display once the programme has ended (depending on the model). Flashing fault display Wasserhahn zu (Tap closed) Cause/Remedial action/Suggestions Not a fault. The washing machine adapts the programme duration accordingly based on factors such as excessive foaming, load imbalance due to heavy items of laundry, longer heating time due to lower supply water temperature, etc. A laundry load imbalance during spinning has caused the spin cycle to be cancelled to protect the washing machine. The cause could be a small load that consists of just a few absorbent items (e. g. – If possible, add a few more items of various sizes if you are washing a large or heavy item of laundry. [. . . ] Tighten the lock nut against the housing. In doing so, hold the foot tight and do not adjust its height. ² – The lock nuts on all of the appliance feet must be screwed tightly against the housing. – Intense noise, vibrations and "wandering" may be the result of incorrect levelling. 33 Electrical connection Electrical safety m Warning! Danger of death from electric shock!– Connect the washing machine to an alternating current via a correctly installed earthed socket only. – The mains voltage and voltage specifications on the washing machine (appliance rating plate) must match. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH WOT24257FF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH WOT24257FF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.