User manual BRANDT WFE0866E

[. . . ] Of course, in an ongoing effort to satisfy your demands with regard to our products as best as possible, our after-sales service department is at your disposal and ready to listen in order to respond to all of your questions and suggestions (contact information at the end of this booklet). Com where you will find all our products, as well as additional, useful information. bRANDT As part of our commitment to constantly improving our products, we reserve the right to make changes to their technical, functional and/or esthetic properties in line with their technological development. Attention: Before installing and using your appliance, please carefully read this Guide to Installation and Use, which will allow you to quickly familiarise yourself with its operation. [. . . ] If the power cable is damaged, it should be replaced by the manufacturer, its after-sales service department or by a qualified person to avoid danger. Ensure that your appliance has not suffered any damage during transport (deformed seal or door, etc. If you see any kind of damage, before doing anything else, contact your retailer. In order to easily locate the reference information for your appliance, we recommend that you note these data on the "AfterSales Service Department and Customer Relations" page. The electrical connections are made before the appliance is installed in its housing. During installation and maintenance operations, the appliance must be unplugged from the electrical grid; fuses must be cut off or removed. The oven must be connected with a power cable (standardized) with three 1. 5 mm2 conductors (1 ph + 1 N + ground) that must be connected to a monophase 220-240 V network via a CEI 60083 standardised receptacle (1 ph + 1 N + ground lead) or in accordance with installation rules. The safety wire (green-yellow) is connected to the appliance's terminal and must be connected to the ground lead of the electrical set-up. We cannot be held responsible for any accident resulting from an inexistent, defective or incorrect ground lead. If the oven malfunctions in any way, unplug the appliance or remove the fuse corresponding to the sector there the oven is hooked up. Clock Setting Press the DEPART key for 5 seconds LED display "0:00" or current time. Turn the function selector to adjust the hour figures, the input time should be within 0-23 (24-hour). Turn the function selector to adjust the minute figures, the input time should be within 0-59. Press the DEPART key to finish clock setting, ":" will flash. Microwave Cooking Press the MICRO/GRIL key several times to select the function you want. Example: If you want to use 700W power to cook for 20 minutes, you can operate the oven as the following steps. press the MICRO/GRIL key once , the oven will display "P900". Press the MICRO/GRIL key once again to choose 700W, the oven will display "P700". Turn the function selector to adjust the cooking time until the oven display"20:00" (The maximum cooking time is 95 minutes. Note: the step quantities for the adjustment time are as follow: 0---1 min : 5 seconds 1---5 min : 10 seconds 5---10 min : 30 seconds 10---30 min : 1 minute 30---95 min : 5 minutes Microwave Power Chart Press Power Display Once 900W P900 Twice 700W P700 3 times 500W P500 4 times 350W P350 5 times 150W P150 Grill & Grill+ Microwave Cooking Press the MICRO/GRIL key several times until "G-1", "G-2" or "G-3" displays. Convection Cooking (With preheating funtion) The convection cooking can let you to cook the food as a traditional oven. [. . . ] Auto Menu Keep pressing the AUTO PROGRAMME key to choose the menu from "A1", "A2". Turn the function selector to choose the default weight as the menu chart. Affichage Press the AUTO PROGRAMME key until you reach the chosen programme (i. A double beep will sound to confirm when the right temperature is reached. [. . . ]