User manual BREVILLE BEK5

[. . . ] Ezy Carve Electric Knife Breville is a registered trademark of Breville Holdings Pty. Limited ABN 98 000 092 928 Breville Customer Care Centre Australian Customers Breville Customer Care Centre Locked Bag 2000 Botany NSW 2019 Australia Customer Service Ph: 1300 139 798 Fax (02) 9384 9601 Email Customer Service askus@breville. com. au New Zealand Customers Breville Customer Service Centre Private Bag 94411 Greenmount Auckland, New Zealand Customer Service Ph: 07 271 3980 Fax 0800 288 513 Email Customer Service askus@breville. com. au ¤ ¤ PRINTED ON RECYCLED PAPER © Copyright. Limited 2004 Due to continual improvements in design or otherwise, the product you purchase may differ slightly from the one illustrated in this booklet. Model BEK5 Issue 1/01 INSTRUCTIONS FOR USE MODEL BEK5 CONTENTS Page BREVILLE RECOMMENDS SAFETY FIRST Congratulations on your purchase of your new Breville Ezy Carve Electric Knife. [. . . ] Young children should be supervised to ensure that they do not play with the appliance. · Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted. · Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven. 1 2 KNOW YOUR BREVILLE EZY CARVE 1. Blade safety guards OPERATING YOUR BREVILLE EZY CARVE BEFORE FIRST USE Remove all promotional labels and wash the stainless steel blades in warm, soapy water. To assemble blades, hold the shaft ends below the Safety Guards and slip the rivet on the tip of the other blade (see fig 1). Fig 1 Always ensure blades are fully locked into position before operating. NOTE! Always use both blades when operating the Ezy Carve. 4. Holding the knife with one hand, depress both the top and bottom ON/OFF controls to activate the knife. The unit will not operate unless both controls are depressed at the same time (see fig 3). Releasing either of the ON/OFF controls will automatically stop the knife. 2. Hold assembled blades by the Safety Guards and insert and slide blades into the blade slot pushing until both blades are locked into position. You will hear a `click' sound (see fig 2). 1. Fig 3 3 4 OPERATING YOUR BREVILLE EZY CARVE (CONTINUED) AVOID CONTACT WITH MOVING PARTS. KEEP HANDS, HAIR, CLOTHING AND OTHER UTENSILS AWAY FROM MOVING BLADES DURING OPERATING TO PREVENT PERSONAL INJURY AND/OR DAMAGE TO THE KNIFE. When slicing is completed, turn the power off at the power outlet and remove the plug. Depress and hold both the Blade Release Buttons on either side of the unit at the same time holding the blades by the Safety Guards. WE RECOMMEND USING THE SAFETY GUARDS AT ALL TIMES PROVIDED WHEN HANDLING THE BLADES. DO NOT FIT OR REMOVE THE BLADES WHILST THE KNIFE IS CONNECTED TO THE POWER OUTLET. [. . . ] · To maintain sharpness of blades, do not cut through frozen foods, bones, fruit pips, stones or any other hard substances. · For best results when carving meat and poultry allow cooked meat to stand for 10-15 minutes before slicing. · A carving fork is recommended for steadying the meat and assists in carving even slices. [. . . ]