User manual BROTHER HL-1470N NETWORK USER

[. . . ] Multi-Protocol Print Server Network User's Guide Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center (http://solutions. brother. com) is your one stop resource for all your printer needs. Download the latest drivers and utilities for your printers, read the FAQs and troubleshooting tips or learn about special printing solutions in the 'Solutions' and 'Customer Education' sections. [. . . ] Enter the NetWare print server name of the print server exactly as it appeared in the NetWare tab of the BRAdmin application (this will generally be the BRN_xxxxxx_P1 or BRO_xxxxxx_P1 default service name, unless you changed the name). You can find the current service name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. Important: Do not assign a password to the print server or it will not log in. Select the printer you created in step 3 and click OK and then OK again. Start the appropriate BRAdmin application, and select the correct print server from the list (by default, the node name is BRN_xxxxxx or BRO_xxxxxx if it is a NC-2000 series print server, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)). You will be prompted for a password, the default password is "access". The same service assigned by NetWare server name cannot be used for both queue server mode and remote printer mode. If you want to enable queue server capabilities on services other than the default NetWare services, you must define new services that are enabled for NetWare and for the desired port. Refer to the Appendix in this manual for information on how to do this. Enter the NDS tree name (note that a print server can service both NDS and bindery queues). Exit the BRAdmin application making sure that you save the changes that you have made. You are now ready to print. 6-9 CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Remote Server Mode in NDS mode) using Novell NWAdmin and BRAdmin To configure a Brother print server for remote printer mode with NWADMIN (NetWare Administrator utility) and BRAdmin, you will need to perform the following steps: 1. Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server and that you are logged in as ADMIN in NDS mode on the NetWare 4. 1x file server. Note the number of the printer, as you will use this later, then click OK. Select the desired Context that will contain the default print queue, and then click on Object and Create to get New Object menu. Make sure that Directory Service Queue is selected, and then type in a name for the default print queue. 6-10 CHAPTER 6 NOVELL NETWARE PRINTING 9. Change the directory context if necessary, then select the desired volume (Objects) and click OK. Change context if required and then double click the name of the printer you created previously. Start the appropriate BRAdmin application, and select the correct print server you wish to configure (by default, the node names will begin with BRN_xxxxxx_P1 or BRO_xxxxxx_P1) You can find the NetWare server name and MAC address by printing out the printer configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. You will be prompted for a password, the default password is "access". [. . . ] 11-3 POP3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2, 5-3, 5-6 PPD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 printcap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 PRINTCAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 sysadmsh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 System 8. 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]