User manual BROTHER M-1324

[. . . ] Calls must be made from within that country. Register your product By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother: may serve as confirmation of the purchase date of your product should you lose your receipt; may support an insurance claim by you in the event of product loss covered by insurance; and, will help us notify you of enhancements to your product and special offers. Please complete and fax the Brother Warranty Registration And Test Sheet or, for your convenience and most efficient way to register your new product, register on-line at http://www. brother. com/registration FAQs (frequently asked questions) The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function Center needs. You can download the latest software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your Brother product. http://solutions. brother. com Note You can check here for Brother driver updates. For Customer Service In USA: 1-800-284-4329 (voice) 1-901-379-1215 (fax) 1-800-284-3238 (TTY service for the hearing-impaired) In Canada: 1-877-BROTHER (voice) (514) 685-4898 (fax) Service Center Locator (USA only) For the location of a Brother authorized service center, call 1-800-284-4357. Service Center Locations (Canada only) For the location of a Brother authorized service center, call 1-877-BROTHER. i Brother fax back system (USA only) Brother has installed an easy-to-use fax back system, so you can get instant answers to common technical questions and product information for all Brother products. [. . . ] Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. The following label on the back of the machine indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. Manufactured: A BROTHER TECHNOLOGY (SHENZHEN) LTD. Gold Garden Industry, Nan Ling Village, Buji, Rong Gang, Shenzhen, China. This product complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. WARNING Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous invisible radiation exposure. Radiation Power 5 mW Wave Length Laser Class 770 810 nm Class 3B 44 Safety and Legal Important safety instructions 1 Read all of these instructions. 4 Unplug this product from the wall outlet before cleaning inside of the machine. 6 Slots and openings in the cabinet at the back or bottom are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heater. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. All other brand and product names mentioned in this User's Guide, the Software User's Guide, and the Network User's Guide are registered trademarks of their respective companies. A 47 B Options B Options This machine has the following optional accessories. You can increase the capabilities of the machine with these items. B Lower tray unit LT-5300 DIMM memory 48 Options Optional Paper Tray (LT-5300) An optional lower tray can be installed, and it can hold up to 250 sheets of 20 lb (80 g/m2) paper. When an optional tray is installed, the machine can hold up to 550 sheets of plain paper. DIMM types B B You can install the following DIMM: 128 MB Buffalo Technology VN133-D128 / VN133-X128 256 MB Buffalo Technology VN133-D256 512 MB Buffalo Technology VN133-D512 64 MB TechWorks 12165-0004 128 MB TechWorks 12462-0001 256 MB TechWorks 12485-0001 512 MB TechWorks 12475-0001 Note For more information, visit the Buffalo Technology site at http://www. buffalotech. com. For more information, visit the Techworks web site at http://www. techworks. com. B For setup, see the User's Guide that we have supplied with the lower tray unit. Memory Board This machine has 32 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs). When you add the optional memory, it increases the performance for both copier and printer operations. In general, the DIMM must have the following specifications: Type: 144 pin and 64 bit output CAS latency: 2 Clock frequency: 100 MHz or more Capacity: 64, 128, 256 or 512 MB Height: 1. 25 in. (31. 75 mm) Dram Type: SDRAM 2 Bank SDRAM can be used. Note There might be some DIMMs that will not work with the machine. For more information, call Brother Customer Service. 49 Installing extra memory B e a b Turn off the machine's power switch. Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet. Hold the DIMM by the edges and align the notches in the DIMM with the protrusions in the slot. [. . . ] User Settings List A printed report that shows the current settings of the machine. F ADF (automatic document feeder) The document can be placed in the ADF and scanned one page at a time automatically. Beeper Volume Volume setting for the beep when you press a key or make an error. Contrast Setting to compensate for dark or light documents, by making copies of dark documents lighter and light documents darker. LCD (liquid crystal display) The display screen on the machine that shows interactive messages during OnScreen Programming. [. . . ]