User manual BROTHER MFC-410CN

[. . . ] USER'S GUIDE MFC-210C MFC-410CN Version A If you need to call Customer Service Please complete the following information for future reference: Model Number: MFC-210C and MFC-410CN (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www. brother. com/registration By registering your product with Brother, you will be recorded as the original owner of the product. ©1996-2004 Brother Industries, Ltd. THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. Compilation and Publication Notice Under the supervision of Brother Industries Ltd. , this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. i Safety precautions To use the MFC safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage electrodes inside the MFC. [. . . ] and Sony Corporation. ) created this standard to make it easier to print images from a digital camera. If your digital camera supports DPOF printing, you will be able to select on the Digital Camera display the images and number of copies you want to print. When the memory card (CompactFlash®, SmartMedia®, Memory Stick®, SecureDigitalTM and xD-Picture CardTM) containing DPOF information is put into your MFC, you can print the selected image easily. 1 Insert your media card into the proper drive (slot). C. Flash Active Press PhotoCapture key. . . The media active message will be shown for 60 seconds and then disappear. Even in that case, you can enter the PhotoCapture mode by pressing PhotoCapture. 2 3 4 5 Press PhotoCapture. If there is a DPOF file on the card, Select & Set DPOF Print:Yes the LCD shows: Press or to select DPOF Print:Yes. If you want to choose the images and their print options now, select DPOF Print:No. 6 Press Colour Start to print. WALK-UP PHOTOCAPTURE CENTERTM 9 - 8 Changing the default settings You can save the PhotoCapture CenterTM settings you use most often by setting them as default. These settings will remain until you change them again. Increasing print speed or quality 1 2 3 1 2 Press Menu/Set, 4, 1. Press Stop/Exit. Setting the paper & size Press Menu/Set, 4, 2. Press or to select Letter Glossy, 10x15cm Glossy, 13x18cm Glossy, A4 Glossy, Letter Plain, A4 Plain, Letter Inkjet, A4 Inkjet or 10x15cm Inkjet. If you selected Letter or A4, press or to select the print size (10 x 8cm, 13 x 9cm, 15 x 10cm, 18 x 13cm, 20 x 15cm or Max. Size is available for MFC-410CN only. 3 9 - 9 WALK-UP PHOTOCAPTURE CENTERTM Adjusting brightness 1 2 3 Press Menu/Set, 4, 3. Press Stop/Exit. Adjusting contrast You can choose the contrast setting. More contrast will make an image look sharper and more vivid. 1 2 3 Press Menu/Set, 4, 4. Press Stop/Exit. Colour enhancement (MFC-410CN only) You can turn on the colour enhancement feature to print more vivid images. If you select On, you can customize the White Balance, Sharpness or Colour Density. WALK-UP PHOTOCAPTURE CENTERTM 9 - 10 3 4 5 Press or to select White Balance, Sharpness or Color Density. Press Stop/Exit. White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this adjustment you can correct this effect and bring the white areas back to pure white. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness. Colour Density This setting adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an image to improve a washed out or weak picture. 9 - 11 WALK-UP PHOTOCAPTURE CENTERTM Cropping If your photo is too long or wide to fit the available space on your selected layout, part of the image will be automatically cropped. [. . . ] 5-3 H HELP LCD messages . . . . . . . . . . . . . . . . B-1 using navigation keys . . . . B-2 Menu Table . . . . . . . . . . . . . . 11-24 L LCD (liquid crystal display) contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 Manual dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 transmission . . . . . . . . . . . . . . . . . . . . . 3-4 Memory Storage . . . . . . . . . . . . . . . . . B-1 Menu Selection Table . . . . . . . . . B-1 Mode, entering Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]