User manual BROTHER NC-9100H NETWORK GUIDE

[. . . ] Other Brother printers can be upgraded with an optional Network Print Server. Version 1 Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP-UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. [. . . ] <For Windows® 95/98/Me users> 15 Select the desired model of the remote printer (for example, Brother HL-series). Click Next when you are done. 16 If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 8 17 Select the Brother Internet port (BIP. . . ) which you selected in step 6 and click Next. <For Windows NT®4. 0 and Windows® 2000/XP users> 15 Select the Brother Internet port (BIP. . . ) which you selected in step 6 and click Next. 16 Select the desired model of the remote printer (for example, Brother HL-series). Click Next when you are done. 17 If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next. 18 Enter any desired name for the BIP remote printer and click Next. Note that this name does not need to match the port name that you assigned in step 6, or E-mail address that you assigned in step 9. 19 Select No when asked if you want to print a test page, unless you have already configured the remote print server to receive BIP print jobs. If you need to configure another remote print server, go to the next section, "Adding a Second Brother Internet Port". 5 - 9 CONFIGURING INTERNET PRINTING FOR WINDOWS® Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, click the Start button, select Settings, and open the Printers window. Click on the icon of a printer that is using BIP, select File from the menu bar, and then choose Properties. Click on the Details (Ports on Windows NT® 4. 0, Windows® 2000/ XP) tab and click the Add Port button. If you are using the built in service names that the Brother print server supports, you can also use the following: (However, please note the Get More Info option will not display any printer data). http://printer_ip_address:631/brn_xxxxxx_p1 http://printer_ip_address:631/binary_p1 http://printer_ip_address:631/text_p1 http://printer_ip_address:631/postscript_p1 http://printer_ip_address:631/pcl_p1 http://printer_ip_address:631/brn_xxxxxx_p1_at Where printer_ip_address is the IP address of the printer. Other Sources of Information 1 Visit http://solutions. brother. com for more information on network printing and for documents on the IPP protocol and how to configure a Windows® 2000/95/98/Me System. 2 Visit Microsoft's web site for the "Microsoft Internet Print Services" software for Windows® 95/98/Me. 3 Refer to chapter 10 of this User's Guide to learn how to configure the IP address of the printer. CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 12 6 6Novell NetWare Printing How to Configure Novell NetWare Printing Overview Brother print servers allow NetWare client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare jobs are spooled through the Novell server and delivered to the printer when it is available. Quick Tips: 1 If you create a NDPS Printer for Netware 5, you have to configure the IP address of the print server in advance. The Automatic Private IP Addressing (APIPA) protocol automatically assigns an IP address from the range: 169. 254. 1. 0 to 169. 254. 254. 255. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192. 0. 0. 192. To change it, use the printer control panel (if applicable), the BRAdmin Professional, Web BRAdmin software or let your DHCP server allocate an IP address to the printer. 2 The default password for Brother print servers is access. 6 - 1 NOVELL NETWARE PRINTING General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue, and the jobs are then spooled (either directly, or in the case of remote printer mode, via an intermediate NetWare print server) to the appropriate Brother print server. The system administrator can create Bindery (NetWare 3), NDS (NetWare 3 and NetWare 4) based queues in a single environment without having to switch between applications by using the BRAdmin application. NetWare 5 users wishing to configure an NDPS printer must use the NWADMIN application supplied with NetWare 5. [. . . ] If you do not provide the correct file name, then the upgrade will fail. You must also ensure that the firmware file is set so that the print server can read the file. On Unix systems you can use the chmod command to specify file attributes. For example, chmod filename 666 allows the filename to be accessed by anyone. [. . . ]