User manual CALIBER RMD602BT

[. . . ] Thank you for purchasing the RMD602BT MP3/USB/SD/MMC Player, with FM/MW Tuner Operating Instructions Safety Precautions Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Only connect the unit to a 12-volt power supply with negative grounding. [. . . ] To resume normal play, repeat the operation. Stop Playback Entirely During MP3 playback: 1. Press key once stopping the playback and the relevant location is saved, press to resume the playback from the saved location. Press to start the playback from the very beginning the Title page. 2 ? 3 ? ♪ ♪ ♪ ♪ ♪ 4 ?♪ ♪ ♪ Select Desired Track - Press or to skip to the next track. - Use 1-9 and 0, 10+ buttons on the remote control to select desired track number. 5 ?Folder ♪ File Fast Forward/Backward During Playback Press or for more than 2 seconds once or more to select X2, X4, X8, X20, to fast backward or forward track during playback. - During the fast forward or backward operation, press briefly to playback again. - During the fast forward or backward operation, the volume will be muted. 7 ? Layer1 Layer 2 Layer 3 Layer 4 Layer5 The player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level. Repeat During playback, press REPEAT once or more. - For File: Display appears RPT ONE RPT DIR RPT ALL RPT OFF Electronic Shock Protection • >45 seconds for MP3 recorded at 44. 1kHz, 128kbps • >90 seconds for WMA recorded at 44. 1kHz, 128kbps Note: If you do not select RPT on, when the entire playback has finished, the system will stop. If no other control, after 5 minutes the unit will turn into standby mode. 14 USB/SD/MMC/MP3 Playback Repeat A B Select desired passage to repeat playback. - Press A Display shows REPEAT A B, and selected passage start to replay. Display - Press A shows A B CANCEL. Bluetooth Mode Accessing Bluetooth Mode Press the SRC button on the front panel or remote control to switch to the Bluetooth source. Note: For your safety, avoid talking on the phone as much as possible while driving. The built-in Bluetooth can connect with the mobile phones having Bluetooth function. After connecting, you can control your mobile phone through the unit. GOTO Goto desired track/chapter or time point directly. Press GOTO button on the remote control, track and time display on top of the screen. Press ENTER to confirm. Pairing Use this function to establish a connection between the unit and your mobile phone. Press the knob more than 2 seconds to enter Setting mode, then Use key to select BT setting item, and use / , key to switch the PAIR: ON/OFF options to ON. “WAITING FOR PAIRING” will appear on the screen. Program - Press PROG to enter program list. - Press to play, or move the cursor to select "PLAY" and press ENTER to play. - If you want to delete the list, move the cursor to "CLEAR", press ENTER to delete all the list set before. [. . . ] Wire the new unit as outlined in the Mounting Sleeve Installation instructions. Mount the new unit assembly to the dashboard or center console using the reverse procedure of step 1. Kit Installation If your vehicle requires the use of an installation kit to mount this unit, follow the instructions included with the installation kit to attach the unit to the mounting plate supplied with the kit. Wire and test the unit as outlined in the Mounting Sleeve Installation instructions. Install the radio/mounting plate assembly to the sub-dashboard according to the instructions in the installation kit. [. . . ]