User manual CANDY FCP686X POP EVO

[. . . ] € Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy Safety Indications • WARNING: the appliance and accessible parts become hot during use. €WARNING: the accessible parts can become hot when the grill is in use. €WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks. €WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off. [. . . ] Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking" programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot. 6 Declaration of compliance The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. Collects the residues that drip during the cooking of foods on the grills. 3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. The first operation to carry out after installation, or after a power cut, is to set the time of day (a power cut has occured if the display is flashing 12:00). 200°-> The temperature LED “°” flashes until the displayed temperature is reached. HOT -> When a programme finishes, if the oven is still hot, the display shows "HOT", alternating with the time, even if the knobs are positioned to OFF. EN 08 FUNCTION SILENCE MODE HOW TO ACTIVATE • Rotate the left function selector to the position " Silence mode “ • Rotate the left function selector to the position “Set the time”. € Use the buttons " + " or " - " to set the time • Turn the right function selector to a cooking function • Rotate the left function selector to the position "Cooking Time Duration” • Set the time of cooking by using buttons " + " and "-" • Lighting Auto appears • Turn the right function selector to a cooking function • Rotate the left function selector to the position "End of cooking" • Set the end time of cooking by using buttons " + " and " - " • Lighting Auto appears HOW TO DEACTIVATE • Rotate the function selector to the position OFF. WHAT IT DOES • Enables you to turn off the sound of the minute minder. € Press the button " + " during 5 seconds • Child lock is available when " STOP " appears on display • Set the time on 00. 00 by turning the left function selector to the position Minute Minder, and using the button " - “ • Turn back the left function selector to Child lock and press button " + " during 5 seconds. 2 Cooking Modes Function Dial T °C default T °C range Function (Depends on the oven model) LAMP: Turns on the oven light. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. 240 the shelf on the second level from top, or to defrost bread pizza or pastry by positioning the shelf on the lower level. the temperature is preset in 60°C constant , no regulation is possible. [. . . ] If the oven is very dirty, it is recommend o increase the time to 90 min, if the oven is moderately dirty reduce the cleaning cycle time to 65 min. 2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the programmer. 3- After few minutes, when the oven reaches a high temperature, the door locks automatically. The pyroclean cycle can be stopped at any time by turning the function selector back to '0' (the word OFF will be displayed for 3 seconds). [. . . ]