User manual CANDY FCPK626XLA

[. . . ] WARNING: the accessible parts can become hot when the grill is in use. WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks. WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off. WARNING: before initiating the automatic cleaning cycle: - clean the oven door; - remove large or coarse food residues from the inside of the oven using a damp sponge. [. . . ] The kitchen unit in which the oven is to be fitted must be made of material resistant to temperatures of at least 70°C. Before fixing, you must ensure good ventilation in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on last page according to the type of fitting. This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have a negative effect on the environment) and base elements (that can be reused). It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules: - the WEEE should not be treated as domestic waste; - the WEEE should be taken to dedicated collection areas managed by the town council or a registered company. In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance. SAVING AND RESPECTING THE ENVIRONMENT Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed cooking" programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot. The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109. By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. Collects the residues that drip during the cooking of foods on the grills. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. Use of the Oven The first operation to carry out after installation, or after a power cut, is to set the time of day (a power cut has occured if the display is flashing 12:00). 200°-> The temperature LED "°" flashes until the displayed temperature is reached. HOT -> When a programme finishes, if the oven is still hot, the display shows "HOT", alternating with the time, even if the knobs are positioned to OFF. [. . . ] 1- Rotate the function selector to the position " On the display, appears the indication " ECO " or The preset time is 65 min, this can be varied from 65 min (Eco mode) to 90 min (Sup mode) via If the oven is very dirty, it is recommend o increase the time To 90 min, if the oven is moderately dirty reduce the cleaning cycle time to 65 min. 2- It is possible to defer the start time of the pyroclean cycle by changing the END time via the 3- After few minutes, when the oven reaches a high temperature, the door locks automatically. Pyroclean cycle can be stopped at any time by turning the function selector back to '0' (the word OFF will 4 - Once the pyroclean cycle is finished, the pyrolysis will switch off automatically. Appears the indication "END" until the door is locked then "0--n". [. . . ]