User manual CANON PIXMA MG5422 EL MANUAL PARA UTILIZAR IMPRIMIR DESDE E-MAIL PARA MACINTOSH [SPANISH VERSION]

[. . . ] Open the Scanning Unit and remove the protective material (A). (A) · Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel. 4 Close the Scanning Unit. · Lift the Scanning Unit to put the Scanning Unit Support back to its original position. IMPORTANT Wait until the preparatory operation is complete; this takes about one to two minutes. 2 Connect the power cord. 1 2 Connect the power cord. [. . . ] IMPORTANT Wait until the preparatory operation is complete; this takes about one to two minutes. 2 Connect the power cord. 1 2 Connect the power cord. Press [ON/OFF] to turn ON the machine. 4 Load the paper. 3 Use [ ] or [ ] on the Operation Panel to select the language on the LCD, then press [OK]. (MP170) 1 2 3 4 Open the Paper Support (1) and pull up the Paper Support Extension (2) until it stops. Load the paper with the print side face up. · Ensure the paper stack does not exceed the Load Limit Mark (A). Pinch and adjust the Paper Guide (3) to the width of the stack. Open the Paper Output Tray. (1) · The language setting is only available for some countries. 3 Install the FINE Cartridge. (2) (3) (A) 1 Lift the Scanning Unit and pull the Scanning Unit Support down into place. The cartridge moves to the left. Install the FINE Cartridges here. The hardware setup is complete. If you are connecting the machine to a computer for use, see the reverse side for instructions on installing the software. IMPORTANT (US only) · Write down the serial number. All products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. QT7-0006-V03 xx2005A © CANON INC. 1 Click [Easy Install], then click [Install]. · To read descriptions of the software programs, set the mouse on the item. Click Click Click Click Step 3: Install the software. 1 Click [Easy Install], then click [Install]. · To read descriptions of the software programs, set the mouse on the item. 2 Click [Yes]. · Installation begins. Follow the displayed instructions. 3 Click [Restart] to restart your computer. Click Click Click 2 Read the License Agreement, then click [Yes]. · Installation begins. Follow the displayed instructions. Click Step 4: Connect the USB cable. 1 When the [Printer Connection] appears, connect the machine to the computer with the USB cable. US only · When the Registration window appears, follow the on-screen instructions to ensure product support. (See "3 Install the FINE Cartridge. " on the reverse side of this sheet) * When connecting from Mac OS X v. 10. 3. 3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again. 2 Turn ON the machine. In Windows 2000, the machine may not be set as the default printer. 3 Click [Exit]. · If prompted to, restart your computer. Perform the following to make sure the driver has been installed correctly. 1. Double-click the [Utilities] folder, then double-click the [Printer Setup Utility] ([Print Center] when using Mac OS X v. 10. 2. x) icon. [. . . ] To resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back ON again. 2 Turn ON the machine. In Windows 2000, the machine may not be set as the default printer. 3 Click [Exit]. · If prompted to, restart your computer. Perform the following to make sure the driver has been installed correctly. 1. Double-click the [Utilities] folder, then double-click the [Printer Setup Utility] ([Print Center] when using Mac OS X v. 10. 2. x) icon. If the printer is displayed in the [Printer List], the printer driver is installed. [. . . ]