User manual CANON PIXMA MP520

[. . . ] Refer to "Aligning the Print Head" in "Routine Maintenance" of the Quick Start Guide. · If the Alarm lamp is lit and an error message is displayed on the LCD, refer to "An Error Message Is Displayed on the LCD" in "Troubleshooting" of the Quick Start Guide. Important If an unintended language is displayed on the LCD, press the Back button on the Operation Panel to return to the Language selection screen. b Remove the orange protective cap from the Print Head and discard it. Electrical Contacts b Plug the power cord in the back of the Once the message "Install the print head and set the ink tank. " appears, go to e. machine and connect the other end to the wall outlet. e Lift the Scanning Unit (Printer Cover) open, and set the Scanning Unit Support to hold the cover. [. . . ] · Before installing the driver, disable all anti-virus programs and automatically loading programs. · A message asking for your confirmation to restart your computer may appear during the installation process. If this message is displayed, follow the on-screen instructions and click OK. The installation resumes from where it left off when your computer has been restarted. · If the computer is restarted during installation, do not remove the Setup CD-ROM during restarting. g When the list of applications to install appears, confirm the contents, click Install. Note Move the cursor over items to display explanations of each application. h Read the License Agreement carefully and click Yes. The software installation screen may appear during the installation process. one end of the USB cable to the computer, the other to the machine, then TURN THE MACHINE ON. The software will begin identifying the printer port being used. Important If you cannot go to the next procedure after three minutes, refer to "Troubleshooting" instructions in the Quick Start Guide. Note · Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v. 10. 2. 7 or earlier are not supported, do not connect the machine to these. · Before installing the driver, disable all anti-virus programs and automatically loading programs. h When the Setup Complete screen appears, click Next. a Connect one end of the USB cable to the computer, the other to the machine. Note Make sure the machine is turned on. i When the Printer Connection screen appears, connect a Be sure to TURN THE MACHINE OFF before continuing. (1) Press the ON/OFF button. (2) Make sure that the Power lamp stops flashing. i When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step j. After software installation is complete, double-click on the desktop. b Turn the computer on and start Windows. Important If the Found New Hardware or Found New Hardware Wizard screen appears automatically, remove the USB cable connected to your computer. In Windows Vista, the screen may close automatically when the USB cable is unplugged. Then turn off the machine and proceed from step c to install the MP Drivers. USB Follow the on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. [. . . ] We would appreciate it if you would take part in this program regarding the use of Canon printers. appears, click Exit. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. Software installation is now complete. m When the Installation completed successfully screen f When the main menu appears, click Easy Install. The MP Drivers, On-screen Manuals, and application software are installed automatically. [. . . ]