User manual CANON REALIS WX6000 D PRO AV BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON REALIS WX6000 D PRO AV. We hope that this CANON REALIS WX6000 D PRO AV user guide will be useful to you.


CANON REALIS WX6000 D PRO AV BROCHURE: Download the complete user guide (13531 Ko)

You may also download the following manuals related to this product:

   CANON REALIS WX6000 D PRO AV WX6000 & SX6000 COMMAND LIST (489 ko)
   CANON REALIS WX6000 D PRO AV REALIS-PRO-AV_LINE-DRAWING.PDF (1569 ko)
   CANON REALIS WX6000 D PRO AV PROJECTING AN IMAGE IN THE DICOM SIM MODE (565 ko)

Manual abstract: user guide CANON REALIS WX6000 D PRO AVBROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] Version number of User Commands changed to "01. 0100. " Entire document Listing of the parameters for each command changed to the listing obtained by the "RANGE" command. Entire document "Character interval timeout" in communication specifications changed from 10ms to 5 seconds (timeout PAGE 2 between CR and LF is 10ms). "GUID" in "User Command System" changed to "GUIDE. " PAGE 8 PAGE 12 "GUID" in "Command List" changed to "GUIDE. Condition added to "RC/MAIN commands" as a condition for returning from power management standby PAGE 11 in "Power Management Mode. " "AUTOSETEXE" command changed from a "setting" command to a "control" command. [. . . ] For all other responses, refer to "Error List. " Description This command is used to control the lighting of the emotional LED and signal sensing LED. (1) It can be executed when the projector is in both the remote mode and power-on status at the same time. However, a "busy" response is given while the zoom or focus lens is being driven. (2) This command functions in the same way as when "System settings" - "LED illumination" are selected on the menu. (3) The current LED illumination setting can be obtained using the GET command. Example Setting > LEDILLUMINATE=ON < i:OK Reference > GET LEDILLUMINATE or ?LEDILLUMINATE < g:LEDILLUMINATE=ON Acquisition of parameters which can be set > RANGE LEDILLUMINATE < r:LEDILLUMINATE=I, ON, OFF The LED display is set to ON. The ON or OFF setting for the LED display is obtained. "ON" or "OFF" can be set for the LED display. Commands supported *Commands are indicated by ">", and responses are indicated by "<". SX50 SX6 SX60 X600 ** ** ** ** When a command is not supported, "e:0002 INVALID_COMMAND" is returned. Supported Command States Model Power supply OFF ON PM D-RGB A-RGB1 A-RGB2 Comp Input Video S-Video D-Video SCART None Mode Remote Local × Remarks SX50 SX6 SX60 X600 ×× *If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent. PAGE 64 User Command Specifications Details of command ZSTEPDRV 1 ZSTEPDRV Commands ZSTEPDRV ZSTEPDRV=<Zoom lens step control parameter> Mode Control Setting Reference Function Zoom lens step drive control Format Parameter Zoom lens step control parameters Parameter Meaning WIDE This zooms to the wide-angle end. The parameters which can be set at any given point in time can be obtained using the RANGE command. Response "i:OK" is returned when zooming was completed successfully after step drive. For all other responses, refer to "Error List. " Description This command is used to initiate the step drive of the zoom lens. For all other responses, refer to "Error List. " Description This command is used to drive the focus lens. (1) It can be executed when the projector is in both the remote mode and power-on status at the same time. However, a "busy" response is given while the zoom or focus lens is being driven. (2) This command functions in the same way as when first the "FOCUS" button on the remote control or main unit panel is pressed and then the "" or "" button is pressed. (3) The amount by which the lens is focused is constant, and it is fixed for the system. Example Control > FSTEPDRV=NEAR < I:OK Range acquisition > RANGE FSTEPDRV < r:FSTEPDRV=I, FAR, NEAR 1-step control is exercised over the zoom toward the NEAR end. "FAR" or "NEAR" can be set for focus step control. Commands supported SX50 SX6 SX60 X600 ** ** ** ** × When a command is not supported, "e:0002 INVALID_COMMAND" is returned. Supported Command States Model Power supply OFF ON PM D-RGB A-RGB1 A-RGB2 Comp Input Video S-Video D-Video SCART None Mode Remote Local × Remarks SX50 SX6 SX60 X600 ×× *If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent. PAGE 67 User Command Specifications Details of command FCONTDRV 1 FCONTDRV Commands FCONTDRV FCONTDRV=<Focus lens continuous control parameter> Mode Control Setting Reference Function Focus lens continuous drive control Format Parameter Focus lens continuous control parameters Parameter STOP FAR NEAR Meaning This stops the focusing. This initiates focusing toward the near end. The parameters which can be set at any given point in time can be obtained using the RANGE command. Response "i:OK" is returned when the drive was completed successfully. For all other responses, refer to "Error List. " Description This command is used to drive the focus lens. (1) It can be executed when the projector is in both the remote mode and power-on status at the same time. [. . . ] Example > RANGE FSTEPDRV < r:FSTEPDRV=I, FAR, NEAR SX50 SX6 SX60 X600 ** ** ** ** × When a command is not supported, "e:000A INVALID_PARAMETER" is returned. Commands supported Supported Command States Model Power supply OFF ON PM D-RGB A-RGB1 A-RGB2 Comp Input Video S-Video D-Video SCART None Mode Remote Local × Remarks SX50 SX6 SX60 X600 ×× *If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent. PAGE 175 User Command Specifications Details of command RANGE FCONTDRV 1 RANGE FCONTDRV Commands RANGE FCONTDRV RANGEFCONTDRV Mode Control Setting Reference Function Focus lens continuous drive control option request Format Response r:FCONTDRV=I, <Setting option 1>, <Setting option 2>, . . . , <Setting option n> For all other responses, refer to "Error List. " This command is used to inquire about the parameter options which enable the focus lens to be driven Description continuously. (1) This inquiry can be made when the projector is in both the remote mode and power-on status at the same time. However, a "busy" response is given if the zoom or focus lens is being driven . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON REALIS WX6000 D PRO AV




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON REALIS WX6000 D PRO AV will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.