User manual CASUALPLAY SONO

[. . . ] This product has been designed, manufactured and approved under the strictest safest regulations. It has also been designed to be easy to use, but we need your collaboration for optimal functioning results of this safety seat. Please read these instructions carefully before installing the product in the vehicle. [. . . ] € We guarantee the safety of the product when it is used by the original buyer, do not use second hand safety products or restraint systems. € It is important that the other passengers in the vehicle also wear their seat belts, because in the event of an accident they could get flung about and injure the baby. € Do not use the restraint system without the upholstery or with upholstery that is different from the original one. € Regularly check the buckle, harness and other parts that may become loose or suffer from wear and tear with use. € The upholstery should be hand washed, using a mild soap and warm water; or it can be machine washed at a maximum temperature of 30ºC and without spin drying. € Make sure that the upholstery on the vehicle seat does not make it difficult to tighten the seat belt. It is approved under Regulation Nº44, 04 series of amendments, for general use in vehicles and will fit most, but not all car seats. Correct installation is possible if the vehicle manufacturer states in the instruction manual that a “UNIVERSAL” restraint system for this age group can be used in the vehicle. This restraint system has been classed as “UNIVERSAL” complying with stricter conditions than the previous designs that do not include this note. IMPORTANT Appropriate use only in vehicles fitted with 3-point seat belts with or without retractor, approved under UN/ECE 16 or equivalent standard. WARNING: Do not use the reclined cradle once your child can sit unaided. WARNING: This reclained cradle is not intended for prolonged periods of sleeping. WARNING: It is dangerous to use this reclined craddle on an elevated surface, e. If your child needs to sleep, he should be placed in a suitable cot or bed. € Do not use accessories or replacement parts that have not been approved by the manufacturer. INSTRUCTIONS FOR USE CHANGING THE POSITION OF THE HANDLE To change the position, press and hold button A while pressing button B. ADJUSTING THE BACKREST • Lift the lever on the back of the backrest to adjust the reclining position (fig. OPENING AND CLOSING THE HARNESS BUCKLE • Bring the two parts of the harness chest straps together and insert them into the female part of the buckle (fig. [. . . ] WARNING: Adjust the tightening of the seat belt every time you change the position of the backrest. UNISYSTEM This exclusive fastening system means that the Sono can be used on the following pushchairs: Avant, Livi, Kudu, Kudu 4, S4, S-Twinner. For all of them, the installation procedure is the following: • Put the parking brake on. [. . . ]