User manual CAT EYE CC-VT100W VECTRA WIRELESS

[. . . ] · Clean the computer and accessories with a soft cloth dampened with a neutral detergent. Do not use thinners, benzene, or alcohol on the computer. Troubleshooting No display. [. . . ] Then check the positions of the battery and magnet. #166-5150 Lithium Battery (CR2032) Correct installation of sensor and magnet A Attach the magnet 3 so that it passes through the sensor zone of the sensor 2. Option Parts #169-6667 Center Mount Kit B Be sure to have a 5 mm-or-less clearance between the sensor 2 and magnet 3. Part names A B C D Current Speed Sensor signal reception icon Flashes in sync with sensor signals. Speed unit Mode symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [Clock] #169-9760 Magnet for Composite Wheel Specification Battery . . . . . . . . . . . Computer: Lithium Battery CR2032 X 1 Sensor: Lithium Battery CR2032 X 1 Battery Life . . . . 1 year (On the basis that the computer is used for 1 hour/ day) Sensor: until Total Distance reaches about 10, 000 km (6, 250 mile) * This is the average figure of being used under 20°C temperature and the dis tance between the computer and the sensor is 65 cm. 4-bit 1-chip microcomputer (crystal controlled oscillator) Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No contact magnetic sensor Wheel Circumference Range 100 cm - 299 cm Working Temperature . . . . . . . . . . 0°C - 40°C (32°F - 104°F) Dimension/Weight . . . . . . . . . . . . . . . 40 x 55 x 21 mm [1-4/7" x 2-1/6" x 5/6"] / 30 g [1. 06 oz] * The factory-loaded battery life might be shorter than the abovementioned specification. * The specifications and design are subject to change without notice. E Battery Case Cover #169-9690 Hi-Power Wheel Magnet Starting/Stopping measurement This computer automatically starts measurement when the bicycle is moving. Switching Mode symbol . . . . . . . . . . . . . . . . . . . . . . b Press the MODE button to cycle through different functions, which are listed in the OPERATION FLOW chart. Resetting data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . b As shown in the OPERATION FLOW, press the MODE button to clear data when RESET appears on the screen. The trip distance cannot be reset. This device complies with Part 15 of the FCC Rules. [. . . ] 115 Boulder, CO 80302 Phone: 303. 443. 4595 Toll Free: 800. 5CATEYE Fax: 303. 473. 0006 E-mail: service@cateye. com URL: http://www. cateye. com Maintenance To clean the computer or accessories, use diluted neutral detergent on a soft cloth, and then wipe it off with a dry cloth. CC-VT100W 3 (Accessories/Attachments and Battery Consumption excluded) If trouble occurs during normal use, the part of the Main Unit or sensor will be repaired or replaced free of charge. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. [. . . ]