User manual CHICCO SEAT UP

[. . . ] WARNINGS • Read these instructions carefully before assembling and installing the product. Prevent anybody that has not read the instructions from using the product. € Each country has different safety laws and regulations for the transportation of children in cars. According to accident statistics, a vehicle’s rear seat is generally safer than the front seat: therefore, we suggest to install the car seat on the rear seat of the vehicle. [. . . ] Adjust the child car seat to position 4, the maximum angle of inclination, using the inclination adjustment lever (G), (Fig. Position the child car seat so that it faces the rear of the car and extract the car’s 3-point seat belt, pulling it out as fare as possible. Pass the abdominal and diagonal sections between the seat and the base of the child car seat (Fig. Fasten the buckle of the seat until you hear a “CLICK” (Fig. Take the diagonal portion of the belt and insert completely in the red clamp (L), holding it open (Fig. If the child weighs less than 9 kg do not use a front-facing car seat. To fit the car seat, remove the Isofix connectors (P) by pulling belt (R) towards the exterior (Fig. Position the child car seat on the seat making reference to the options suggested in your car’s user manual. Fasten the two ISOFIX connectors (P) to the corresponding ISOFIX hooks on the car seat between the backrest and the seat (Fig. Pull the car seat towards you and then check that the two indicators are green (Fig. Make sure there are no objects between the child car seat and the vehicle seat or between the child car seat and car door. Push the child car seat firmly against the backrest of the car seat (Fig. The assembly of the child car seat is completed exclusively with the installation of the Top Tether (T). Refer to your car’s user manual to identify where the Top Tether of the child car sear is attached to the car. 20) and can be found in the positions indicated by the figures 21A – 21B – 21C – 21D. Check that the Top Tether fastener used is the one that has been specially designated. Pass the Top Tether between the top of the car seat backrest and the headrest. Once you have identified the fastening point, connect to the Top Tether hook (U). Adjust the length of the Top Tether belt by forcefully pulling the belt until it is tight. The indicator on the belt goes green (W) when the tether is suitably tight (Fig. To disassemble the child car seat, unhook the Top Tether and the Isofix connectors by pressing the release buttons (Q) (Fig. HOW TO FIT THE GROUP 1 (9-18 kg) CHILD CAR SEAT TO THE CAR WITH A 3-POINT SEAT BELT The slots for the car seat belts are clearly marked on the child car seat with red colour guide items. [. . . ] CLEANING AND MAINTENANCE MAINTENANCE Cleaning and maintenance operations must only be carried out by an adult. How to clean the fabric cover The child car seat’s fabric cover can be removed and washed by hand or in a washing machine at 30°C. Please refer to the care label for instructions on cleaning the seat fabric. Do not bleach Do not tumble dry Do not iron Do not dry clean Never use abrasive detergents or solvents. [. . . ]