User manual COMPRO U100 START UP GUIDE

[. . . ] VideoMate Vista U100 USB 2. 0 DVB-T Stick Start Up Guide Compro Technology, Inc. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. Compro makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. [. . . ] Close ComproDTV 4 and even shutdown the computer with the full function remote control keypad. Options Press the Options button to open the Options dialog box. You can change detail settings of ComproDTV 4 here. TV Settings This option gives you the way to manually set the method of scanning TV programs. Select your choice here or use default channel table to do the scanning. Autoscan The first time you start ComproDTV 4, Autoscan will automatically scan for available TV channels for TV signals. Please select your TV source from analog cable/antenna or from digital antenna. You can rescan the channels at any time by pressing the Autoscan button. When Autoscan is finished, detected channels are automatically enabled and marked with the green check mark . Channels, where a valid signal could not be detected, are disabled and marked with a blank. However, you 15 can interrupt the scanning process by pressing the Stop button. When Starting PIP mode, there will be two option for you to choose; 1. "Digital Sub Window" If any one of connected products have digital TV feature. "VideoMate xxx (another installed product name) Video Capture" Other analog or digital TV cards/USB box. (Pictures below show the H900 for example of the second device) 17 Choosing the "Digital Sub Window" will open a new window to view the digital sub channels in the same frequency of the main window. Choosing the "VideoMate xxx Video Capture" will open a new window to view digital or analog channel with the second tuner in other products, which you are able to tune to any channel you prefer. However, you are only allowed to have one channel from the second tuner. Therefore, you can view total of five channels with main window's channel and three sub channels of the main window and another channel of the second tuner. Furthermore, you can also have another window to playback recorded file which now allows you to watch total of 6 windows at the same time. Note Running additional windows consumes more CPU usage. When main window changes the channel to another frequency, slave window(s) will move to available programs of another frequency. The slave window will show black if there is no additional program on this frequency. Please double-click on slave window to switch program with main window in order to do so. However, main window audio can't be muted separately from slave window(s). Video Desktop While watching TV, you may right-click on the TV screen and select video on desktop or press the hotkey (F7) to activate Video Desktop mode. It is similar with full screen but the desktop icons and taskbar will remain on top. For the Video Desktop feature, you needs to enable the "Use Overlay Surface" feature in the setup dialog box of Option Video/Audio. Right-Click Mouse Menu If using mouse to right-click on the TV screen, you can see a menu pop up. [. . . ] Try to move the computer to a TV set and connect the cable which is being used for the TV set. Once you connect the cable to our TV card, the static interferes with the system. It's possible to correct this problem by connecting a wire from the grounding of the cable to ground. You are welcome to visit our website at http://www. comprousa. com/support No digital broadcast signal In order to receive digital terrestrial TV broadcasts, an antenna is crucial. [. . . ]