User manual DEWALT D21520

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DEWALT D21520. We hope that this DEWALT D21520 user guide will be useful to you.


DEWALT D21520 : Download the complete user guide (1020 Ko)

Manual abstract: user guide DEWALT D21520

Detailed instructions for use are in the User's Guide.

[. . . ] There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. E When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [. . . ] Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts. additional safety instructions for rotary drills · Use auxiliary handles supplied with the tool. 1 2 3 4 5 6 7 8 Variable speed switch Lock-on button Forward/reverse slider Keyed chuck Side handle Spade handle Sleeve Chuck key Always check that the power supply corresponds to the voltage on the rating plate. Your DEWALT tool is double insulated in accordance with EN 60745; therefore no earth wire is required. Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorized DEWALT repair agent or a qualified electrician. Cut off the plug and dispose of it safely; a plug with bared copper conductors is dangerous if engaged in a live socket outlet. Only fit 13 Amperes BS1363A approved plugs fitted with the correctly rated fuse (1). The cable wire colours, or a letter, will be marked at the connection points of most good quality plugs. Before replacing the top cover of the mains plug ensure that the cable restraint (3) is holding the outer sheath of the cable firmly and that the two leads are correctly fixed at the terminal screws. Check for damage to the tool, parts or accessories which may have occurredduring transport. Take the time to thoroughly read and understand this manual prior to operation. Your professional rotary drill D21520 has been designed for heavy duty rotary drilling, thread tapping and mixing. Never connect the live (L) or neutral (N) wires to the earth pin marked E or . For 115 V units with a power rating exceeding 1500 W, we recommend to fit a plug to BS4343 standard. Screw the side handle (5) into one of the corresponding holes in the tool. Screw the spade handle (6) into the corresponding hole on the back of the tool. To select forward or reverse rotation, use the forward/reverse-switch (3) (see arrow on tool). [. . . ] Your DEWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Cleaning Keep the ventilation slots clear and regularly clean the housing with a soft cloth. If you are not completely satisfied with the performance of your DEWALT tool, simply return it within 30 days, complete as purchased, to the point of purchase, for a full refund or exchange. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DEWALT D21520




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DEWALT D21520 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.