User manual DEWALT D23620
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DEWALT D23620. We hope that this DEWALT D23620 user guide will be useful to you.
Manual abstract: user guide DEWALT D23620
Detailed instructions for use are in the User's Guide.
[. . . ] There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. E When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [. . . ] Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur. investigate and take corrective actions to eliminate the cause of blade binding. C When restarting a saw in the workpiece, centre the saw blade in the kerf and check that saw teeth are not engaged into the material. If saw blade is binding, it may walk up or kickback from the workpiece as the saw is restarted. D Support large panels to minimise the risk of blade pinching and kickback. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel. F Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade adjustment shifts while cutting, it may cause binding and kickback. G Use extra caution when making a , , plunge cut" into existing walls or other blind areas. Safety instructions for saws with a pendulum blade guard a Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly. Raise the lower guard with the retracting handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris. C Lower guard should be retracted manually only for special cuts such as "plunge cuts" and "compound cuts". Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. D Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released. Additional safety instructions for all saws with riving knife a Use the appropriate riving knife for the blade being used. For the riving knife to work, it must be thicker than the body of the blade but thinner than the tooth set of the blade. Incorrect spacing, positioning and alignment can make the riving knife ineffective in preventing kickback. [. . . ] To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local DEWALT office at the address indicated in this manual. Alternatively, a list of authorised DEWALT repair agents and full details of our after-sales service and contacts are available on the Internet at: www. If you need maintenance or service for your DEWALT tool, in the 12 months following purchase, it will be undertaken free of charge at an authorized DEWALT repair agent. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DEWALT D23620
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DEWALT D23620 will begin.