User manual DEWALT DC984KA

[. . . ] Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Torque Chuck capacity Maximum drilling capacity in steel/wood/masonry Weight (without battery pack) Battery pack Battery type Voltage Capacity Weight Battery pack Battery type Voltage Capacity Weight Charger Battery type Mains voltage Approx. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. wARNING: The declared vibration emission level represents the main applications of the tool. [. . . ] Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire. Disconnect the charger from the outlet before attempting any cleaning. Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack. To reduce the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage. CAUTION: Under certain conditions, with the charger plugged in to the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. DO NOT attempt to charge the battery pack with any chargers other than the ones in Your DE9116 charger accepts DEWALT NiCd and NiMH battery packs ranging from 7. These chargers require no adjustment and are designed to be as easy as possible to operate. When ordering replacement battery packs, be sure to include catalog number and voltage. consult the chart at the end of this manual for compatibility of chargers and battery packs. Before using the battery pack and charger, read the safety instructions below. Plug the charger (12) into an appropriate outlet before inserting battery pack. The pack is fully charged and may be used at this time or left in the charger. Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes. Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40° C (105° F) (such as outside sheds or metal buildings in summer). If battery pack case is cracked or damaged, do not insert into charger. Damaged battery packs should be returned to service center for recycling. If battery pack case is cracked or damaged, do not insert into charger. [. . . ] Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure. WARNING: Never use solvents or other harsh chemicals for cleaning the nonmetallic parts of the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. [. . . ]