User manual DIGITECH MIDIEQ

[. . . ] opening the chassis for any reason will void the manufacturer's warranty. if liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. disconnect the unit during storms to prevent damage. Safety InStructIonS FOLLOW ALL INSTRUCTIONS THE APPARATUS SHALL NOT BE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO OBjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL BE PLACED ON THE APPARATUS CLEAN ONLY WITH A DRY CLOTH. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. [. . . ] New cards should be formatted 5. 6. 7. 8. 17 Guided Tour - Rear Panel in the JamMan® Stereo before use (see page 55). The JamMan Stereo ships with 35 minutes of internal stereo loop memory. USB Jack The USB jack provides a connection to a Windows or Mac computer for transferring loop files to and from the JamMan Stereo via the downloadable JamManagerTM loop librarian application. 10. The JamMan Stereo can only be powered by using the external adapter. 18 Making Connections Instrument - Mono Instrument - Stereo 19 Making Connections Mic/Vocal Performance 4 2 0 4 2 0 -1 -2 -3 -4 -5 6 82 4 6 82 4 6 82 4 6 82 4 6 82 4 6 82 4 6 82 4 6 8 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 82 0 4 Aux 1 10 6 8 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 +3 +4 +4 -4 +4 -4 -5 +4 -4 -5 +4 -4 -5 +4 -4 -5 +4 -4 -5 +4 -4 -5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 -5 Pan +5 Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - 1 2 3 4 5 6 DJ Setup Aux Return Aux Send 20 Making Connections MP3 Player/Headphones 2 Backing Tracks Backing tracks (no rhythm guide track) 4 2 0 4 2 0 -1 -2 -3 -4 -5 6 82 4 6 82 0 4 82 4 6 82 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 4 6 82 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 -5 4 6 82 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 -5 4 6 82 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 -5 4 6 82 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 -5 4 6 8 0 4 82 0 -1 +2 -2 +3 -3 +4 -4 -5 Loop audio (with rhythm guide track) Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 Aux 1 10 6 8 Aux 2 10 0 +1 Aux 2 10 0 +1 Aux 2 10 0 +1 Aux 2 10 0 +1 Aux 2 10 0 +1 Aux 2 10 0 +1 Aux 2 10 0 +1 +2 0 -1 -2 +3 -3 Aux 2 10 0 +1 +2 +3 +4 +4 -4 -5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 Pan +5 -5 Pan +5 Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R Mute L/R +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 +10 +5 0 -5 -10 -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - -20 -30 - 1 2 3 4 5 6 21 Selecting a Loop The JamMan® Stereo has two banks of loop memory, internal and optional card memory. There are 99 memory locations available in each of these banks for a total of 198 memories when an optional SD/SDHC memory card is installed. The card memory bank is only available when a memory card is installed. To select loops, Press either the LooP UP or LooP DoWN footswitches or use the LooP seLect knob next to the DIsPLaY. Pressing the LooP UP footswitch will select the next loop above the current loop. Pressing the LooP DoWN footswitch will select the previous loop below. Pressing and holding either of these footswitches will scroll through the loop memories in its respective direction. The DIsPLaY will show the memory location number as these buttons are pressed. The JamMan monitors the input level and starts the recording when it detects an audio signal. If you've tapped in a tempo while Auto Record is enabled, the rhythm guide track will begin playing. Pressing the Rec/PLaY/oVeRDUb footswitch will arm the JamMan Stereo for recording. Changing to an empty loop memory while aUto Rec is enabled will preserve the aUto Rec state (the aUto Rec button will turn off when a memory that has a loop already stored in it is selected). To turn off Auto Record, press the aUto Rec button until it turns off. 26 Auto Record Mode Auto Record button 27 Recording a Loop Using Auto Record The JamMan® Stereo has an Auto Record feature that automatically starts recording when signal is detected at any of the JamMan Stereo's inputs. NOTE: The maximum loop time the JamMan Stereo can record or play is 10 minutes. You can't auto-record on an existing loop; Auto Record is only available when an empty loop memory is selected. Select an empty memory location using the LooP seLect knob or LooP UP/LooP DoWN footswitches (the LooP and sINgLe LEDs will be off). If the caRD MeM LED is lit, you have selected an empty location on the optional memory card. The Rec/PLaY/oVeRDUb footswitch and RecoRD status LEDs will be quickly flashing red indicating the JamMan Stereo is armed for recording. The Rec/PLaY/oVeRDUb footswitch and RecoRD status LEDs will light solid red to indicate recording is now taking place. [. . . ] When the delete procedure is complete the display will return to the memory number and the eXIt and DeLete buttons will turn off. 4. 5. 52 Erase All Loops - Internal Memory 1 2 3 4 5 53 Using Optional SD/SDHC Memory Cards The JamMan® Stereo offers 35 minutes of total built-in loop memory storage. You can increase the loop memory by installing an optional SD/ SDHC memory card in the memory card slot on the rear panel. The JamMan Stereo is compatible with SD/SDHC card sizes up to 32GB for over 16 hours of total loop memory. [. . . ]