User manual DOMO DO486BL

[. . . ] The accessories and parts can also still be obtained at the store where you bought the appliance. If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. B e 35 o nl ow D DO486BL ad SAFETY INSTRUCTIONS This appliance may be used by children from the age of 8 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance. [. . . ] €¢ Be careful when coming in the vicinity of the blades: ed fro m w w w an . Be DO486BL when removing the blades, emptying the jar or when cleaning the device. €¢ Should the motor overheat, the overheat protection will kick in and turn off the motor. Subsequently turn off the device and carefully remove the plug from the socket to let the motor cool off. After about 45 minutes, the device will have cooled enough to be used again. €¢ Pull the plug from the socket as soon as you’ve stopped using, disassembled or cleaned the device. Measuring cup (90ml) Lid Jar Motor unit Control knob Anti-skid feet 1 2 3 4 5 CONTROL KNOB 1. 6 Automatic programme for smoothies Automatic programme for vegetables Automatic programme for soup OFF: ‘off’-position PULSE – ON/OFF: Pulse function with on/off button Indication light: device in stand by = red, device working = blue Power indication light Speed setting control 39 o nl ow D DO486BL ad 4 ed fro m w w w 3 2 1 8 5 6 7 an . Attention: The amount of ingredients may not exceed the maximum level indication on the jar!Place the measuring cup into the lid by matching the two small tabs on the measuring cup with the two notches in the lid’s fill opening. Attention: always make sure the measuring cup is locked in its place before blending warm fluids. Select the speed, programme or use the pulse function by using the instructions below. Turn off the device after using it, turn the control knob in its OFF position and carefully pull the plug from the socket. STAND BY AND POWER SAVE MODE • • Put the plug into the socket and place the jar onto the device. The power indication light will turn on and the indication light around the PULSE - ON/OFF button will light up red. When the device hasn’t been used for 3 minutes, only the power indication light will remain lit up. Be DO486BL ad ed ON/OFF BUTTON • • • • This button is the on/off button for the various programmes To start a certain programme, select the programme you want by turning the control knob to the programme you prefer. The indication light surrounding the PULSE - ON/OFF button will now light up blue. B e PULSE BUTTON • • This is the button to manually operate the pulse function. To use the pulse function, the blender needs to be in stand by mode and the speed setting control needs to be in OFF. Each time you press the pulse button, the blender will blend at full power. The indication light surrounding the control button will light up blue. [. . . ] Fro m w w NOTE SURROUNDING USAGE • • • • • • • • Never use the device in the following situations: • When the jar hasn’t been correctly placed on the motor unit. €¢ When the control knob has selected a speed setting before the jar has been placed correctly onto the motor unit. €¢ When the jar has been taken off the motor unit and simply put back in place. You are required to first turn the control knob in its OFF position before placing the jar correctly on the motor unit. [. . . ]