User manual DURKOPP 0791 867708 FITTING INSTRUCTIONS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DURKOPP 0791 867708. We hope that this DURKOPP 0791 867708 user guide will be useful to you.
Manual abstract: user guide DURKOPP 0791 867708FITTING INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] Before beginning the installation: Please check whether all the components of the kit have been correctly delivered. [. . . ] Fold down the thread tensioner plate 1 Pull off the compressed-air hoses 3 and 4. Run the cable 5 from the thread tensioner plate behind the operating panel to the PCB 6. The cable that runs from the output "ST2" on the control unit to the input "X11" on the PCB must be dismantled and replaced by the cable harness that is part of the kit. Run the new cable harness 2 through the table top cutout to the machine head. Fix the the box 5 with the additional control by screwing it underneath the table plate. The length of the protruding needle thread can be set with the stroke limitator 1. [. . . ] The following parameters have to be set on the control unit: F-13 =1 F-100= 2 F-115=250 F-116=140 F-134 =1 F-136=2 F-154=8 F-180=45 F-181=20 F-182=1 Thread trimmer on/off Number of soft start stitches (change from 1 to 2) Softstart speed (change from 400 to 250) Trimming speed (change from 150 to 140) Soft start on/off Short thread trimmer stitch Function thread clamp Reversing angle Switch-on delay of reverse motor rotation (change from 0 to 20) Reverse motor rotation on/off Note: The functions "thread clamp" and "neat seam beginning" are not yet active at the first sewing start after switching on the control unit. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DURKOPP 0791 867708
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DURKOPP 0791 867708 will begin.